Tweet
I finally got my 3.4L V6 on an engine stand and decided to start selling it off. The engine has approximately 1,000 miles on it. Here's what I have:
Ross Racing forged aluminum flat-top pistons. Cut for a +0.020" bore. Flat-top gives a 10.0:1 compression on stock heads. Will need new piston rings. Comes with 4340 forged taper-cut wrist pins (0.912" diameter). Also has spiro-lox for full float wrist pin setup. These pistons can also be used in a press-fit application such as the OEM forged steel connecting rod setup. $500.
Manley Forged Aluminum Connecting Rods - Nitrous series. 580 grams/each. Rated to 1300 HP. Modification to oil pan will be necessary for clearance. New Clevite 77 Heavy Duty rod bearings will be needed. I have the part number if needed. $500.
Engine block - nothing too special here. Bored 0.020" over. ARP main studs installed. $250
Lunati custom grind camshaft:
Cam Lift @ Valve:
.496 IN - .496 EX w/1.6 Rocker Arms
Duration @ .050" Tappet Lift
228* IN - 228* EX
Lobe Seperation Angle - 110*
High RPM power range, VERY choppy idle.
$100
I'd be happy to make a deal on all of the above if someone wants all of it.
Also have OEM side skirts (ground effects) from a 1996 RS Camaro. These are the same as the 1993-2002 Camaros. - Make offer.
Email me at Viper98885@aol.com if you are interested in any of the above items.
Ross Racing forged aluminum flat-top pistons. Cut for a +0.020" bore. Flat-top gives a 10.0:1 compression on stock heads. Will need new piston rings. Comes with 4340 forged taper-cut wrist pins (0.912" diameter). Also has spiro-lox for full float wrist pin setup. These pistons can also be used in a press-fit application such as the OEM forged steel connecting rod setup. $500.
Manley Forged Aluminum Connecting Rods - Nitrous series. 580 grams/each. Rated to 1300 HP. Modification to oil pan will be necessary for clearance. New Clevite 77 Heavy Duty rod bearings will be needed. I have the part number if needed. $500.
Engine block - nothing too special here. Bored 0.020" over. ARP main studs installed. $250
Lunati custom grind camshaft:
Cam Lift @ Valve:
.496 IN - .496 EX w/1.6 Rocker Arms
Duration @ .050" Tappet Lift
228* IN - 228* EX
Lobe Seperation Angle - 110*
High RPM power range, VERY choppy idle.
$100
I'd be happy to make a deal on all of the above if someone wants all of it.
Also have OEM side skirts (ground effects) from a 1996 RS Camaro. These are the same as the 1993-2002 Camaros. - Make offer.
Email me at Viper98885@aol.com if you are interested in any of the above items.
Comment