Tweet
Parts are from a totaled 2008 Pontiac Grand Prix with 56,000 miles on it. Series III RPO code L26, many of which parts will work on a L36 Series II. Also they newer set of parts are from a 2006 Grand Prix L26 with 42,000 miles.
I dont have pics yet or a complete list of parts, but this Is what I have off the top of my head: NO I DO NOT HAVE ANY BODY PARTS.
Upper intake manifold plenum, the revised aluminum version. x2
Lower intake manifold x2
Fuel Rail with 6 OE injectors on it x2
Throttle Body x2
Various mounts/ brackets x2
Front main cover x2
Water pump -appears to have had another coolant not dexcool mixed in at one point, should clean out/ flush no problem x2 (other one is clean)
Flex Plate/ flywheel x2
Exhaust manifolds x2
Oil Pan x2
EGR valvex2
Another thingey that looks like an EGR valve, not sure what it is. Did the have 2? x2
Ignition control module with 3 coil packs x2
Balancer x1
Rear main cover x2
Power steering pump x1
1 Set of L36 Heads. 150K
1 Set of L36 Pistons w/ rods attached 150K
1 L36 Crank 150k
1 L36 balancer
3 OEM cams
1 Set of L36 heads. Milled .025", polished intake ports, polished and widened exhaust ports. 5 Angle valve job. Phosphor bronze valve guides. They only have intake valves. I bent the exhaust valves. I only ran them 10 miles. They will only include the bare heads and the intake valves. $50+ shipping.
I dont have pics yet or a complete list of parts, but this Is what I have off the top of my head: NO I DO NOT HAVE ANY BODY PARTS.
Upper intake manifold plenum, the revised aluminum version. x2
Lower intake manifold x2
Fuel Rail with 6 OE injectors on it x2
Throttle Body x2
Various mounts/ brackets x2
Front main cover x2
Water pump -appears to have had another coolant not dexcool mixed in at one point, should clean out/ flush no problem x2 (other one is clean)
Flex Plate/ flywheel x2
Exhaust manifolds x2
Oil Pan x2
EGR valvex2
Another thingey that looks like an EGR valve, not sure what it is. Did the have 2? x2
Ignition control module with 3 coil packs x2
Balancer x1
Rear main cover x2
Power steering pump x1
1 Set of L36 Heads. 150K
1 Set of L36 Pistons w/ rods attached 150K
1 L36 Crank 150k
1 L36 balancer
3 OEM cams
1 Set of L36 heads. Milled .025", polished intake ports, polished and widened exhaust ports. 5 Angle valve job. Phosphor bronze valve guides. They only have intake valves. I bent the exhaust valves. I only ran them 10 miles. They will only include the bare heads and the intake valves. $50+ shipping.
Comment