Tweet
Clearing out my garage, got a few things I need outta here.
T-56 Adapter by "The Gear Box."
This is a prototype setup, it had two bolt patterns to work with either a Mustang or a GM T-5 bellhousing. I'm selling this because I didn't have the time or patience to modify the T-56 that I'd already finished rebuilding. You'll need a longer input shaft, a hydraulic throwout bearing that will go over the snout of the adapter (designed for a remote throwout w/ a shifter fork). You'll need to make some modifications to the inner plate of the adapter if you get a GTO T-56 or any of the others that have a protrusion into that plane, you'll see it when you get it. Easily done if you have some machining tools or a friend with some.
$175 Shipped
T-5 Bellhousing for a 3800 V6 F-body.
$75 shipped
4L60E Yank Torque Arm Relocation Cross member. I have the bracket for the torque arm, it just wasn't in the picture.
$75 shipped
3800 V6 F-body flexplate. 17K miles, bought brand new from GM dealer and installed with trans rebuild. ~$115 new
$30+shipping
Stock steel one piece F-body driveshaft:
$30 shipped
SOLD
4L60E for a 3800 V6 F-body: Built by Richard at Precision Transmission in Amarillo, TX. Supposed to be good for ~600hp at the crank. Only 17K miles on it. No track use, didn't get to use sticky tires on it either. Shifts are great, doesn't beat you to death while shifting under cruise. At WOT it will shift hard and very fast. Never missed a beat, no complaints whatsoever.
$800 + shipping Prefer local pickup, but we all know how that is with our community.
SOLD
SOLD
QA1 single adjustable front coilovers and rear shocks w/ WS6 rear springs.
$400SOLD
SOLD
BMR 32mm Solid swaybar (RED)
19mm rear swaybar off a B4C Camaro (BLACK)
With endlinks
$100 for the set.SOLD
SOLDTCI Super streetfighter 3800 Stall, used for ~17K miles on my car and an unknown time in Usd2Sing's all motor/nitrous car. This is an amazing stall, and will absolutely cause you to haze street tires if you get froggy.
$300 shipped.SOLD
SOLDHayden 1405 Transmission cooler. 15-7/8" x 10" x 3/4"
17K miles as well.
$30 shipped. SOLD
T-56 Adapter by "The Gear Box."
This is a prototype setup, it had two bolt patterns to work with either a Mustang or a GM T-5 bellhousing. I'm selling this because I didn't have the time or patience to modify the T-56 that I'd already finished rebuilding. You'll need a longer input shaft, a hydraulic throwout bearing that will go over the snout of the adapter (designed for a remote throwout w/ a shifter fork). You'll need to make some modifications to the inner plate of the adapter if you get a GTO T-56 or any of the others that have a protrusion into that plane, you'll see it when you get it. Easily done if you have some machining tools or a friend with some.
$175 Shipped
T-5 Bellhousing for a 3800 V6 F-body.
$75 shipped
4L60E Yank Torque Arm Relocation Cross member. I have the bracket for the torque arm, it just wasn't in the picture.
$75 shipped
3800 V6 F-body flexplate. 17K miles, bought brand new from GM dealer and installed with trans rebuild. ~$115 new
$30+shipping
Stock steel one piece F-body driveshaft:
$30 shipped
SOLD
4L60E for a 3800 V6 F-body: Built by Richard at Precision Transmission in Amarillo, TX. Supposed to be good for ~600hp at the crank. Only 17K miles on it. No track use, didn't get to use sticky tires on it either. Shifts are great, doesn't beat you to death while shifting under cruise. At WOT it will shift hard and very fast. Never missed a beat, no complaints whatsoever.
$800 + shipping Prefer local pickup, but we all know how that is with our community.
SOLD
SOLD
QA1 single adjustable front coilovers and rear shocks w/ WS6 rear springs.
$400SOLD
SOLD
BMR 32mm Solid swaybar (RED)
19mm rear swaybar off a B4C Camaro (BLACK)
With endlinks
$100 for the set.SOLD
SOLDTCI Super streetfighter 3800 Stall, used for ~17K miles on my car and an unknown time in Usd2Sing's all motor/nitrous car. This is an amazing stall, and will absolutely cause you to haze street tires if you get froggy.
$300 shipped.SOLD
SOLDHayden 1405 Transmission cooler. 15-7/8" x 10" x 3/4"
17K miles as well.
$30 shipped. SOLD
Comment