Tweet
For Sale:
Brand new Force Fed Fabrications turbo kit.
Included in the kit:
Hybrid To4E/T3 Turbo internally wastegated around 7 psi
Spearco Intercooler 30x6x3
Bosch Blow off Valve
Vortech FMU
MSD High pressure inline pump
Silicone connectors
Autometer Boost Gauge
All required lines, fittings, clamps,etc that will be needed
6 Taylor 8mm wires (Blue)
6 NGK Iridium .035" gapped spark plugs
Manual Boost Controller
** Piping
(All piping is included but it is unfinished. The intake piece needs cut and fitted against the throttle body. The piece that connects to the headers needs to also be cut and fitted to the headers. These were left undone because my car was a 98' and they would have to be fixed either way.) The rest of the pipes are complete.
Optional:
Ported and Polished Intakes for an angled throttle bodied car.
Everything above totalled $3,275.00.
Price: $2,250.00
Shipped anywhere in the continental United States
*$2,300.00 Shipped with the intakes.
Here is some information about the kit from Force Fed Fabrications
@ 5 psi - 255 rwhp 290 rwtq
@ 7 psi - 294 rwhp 360 rwtq
@ 13 psi - 336 rwhp 399 rwtq
@15 psi - 352 rwhp 416 rwtq
...On the 15 psi run the car simply ran out of fuel, the injectors locked up. This prevented us from doing a full pull at the level. This should relate to a near 400 rwhp 460 rwtq run when fuel issues are solved.
Any questions or offers can be sent to Trickyrick33@yahoo.com.
[ July 14, 2005, 10:50 PM: Message edited by: Th3 RiCk ]
Brand new Force Fed Fabrications turbo kit.
Included in the kit:
Hybrid To4E/T3 Turbo internally wastegated around 7 psi
Spearco Intercooler 30x6x3
Bosch Blow off Valve
Vortech FMU
MSD High pressure inline pump
Silicone connectors
Autometer Boost Gauge
All required lines, fittings, clamps,etc that will be needed
6 Taylor 8mm wires (Blue)
6 NGK Iridium .035" gapped spark plugs
Manual Boost Controller
** Piping
(All piping is included but it is unfinished. The intake piece needs cut and fitted against the throttle body. The piece that connects to the headers needs to also be cut and fitted to the headers. These were left undone because my car was a 98' and they would have to be fixed either way.) The rest of the pipes are complete.
Optional:
Ported and Polished Intakes for an angled throttle bodied car.
Everything above totalled $3,275.00.
Price: $2,250.00
Shipped anywhere in the continental United States
*$2,300.00 Shipped with the intakes.
Here is some information about the kit from Force Fed Fabrications
@ 5 psi - 255 rwhp 290 rwtq
@ 7 psi - 294 rwhp 360 rwtq
@ 13 psi - 336 rwhp 399 rwtq
@15 psi - 352 rwhp 416 rwtq
...On the 15 psi run the car simply ran out of fuel, the injectors locked up. This prevented us from doing a full pull at the level. This should relate to a near 400 rwhp 460 rwtq run when fuel issues are solved.
Any questions or offers can be sent to Trickyrick33@yahoo.com.
[ July 14, 2005, 10:50 PM: Message edited by: Th3 RiCk ]
Comment