Tweet
1996 3.8 V6 A4 Camaro
Red
manual everything (windows, locks, seats)
Just under 61000 miles
Windows tinted 20% all around
Blackouts all around
Blaupunkt Key Largo CD head unit
Sony 6.5s all around
Manual Fan switch (codes have been disabled via HPTuners)
SLP Intake
RKSport headers
Catco 3" hi-flow cat
Flowmaster 3" catback w/ chrome turndowns
3.42 Gears
LSD
Lakewood Boxed Lower control arms
ES poly torque arm bushing
ES poly tranny mount
Aluminum Driveshaft
NGK TR6s
Taylor Spiro 8mm wires
Tranny was completely rebuilt with high energy components (kevlar, carbon fiber have receipts, shifts fairly hard)
TransGo shift kit
Corvetter Servo
Yank 2800 stall Converter
Flex-a-lite Transmission Cooler
97 PCM Programmed for 3.42s and tire height, fans come on earlier, disabled fan codes and post cat O2 codes, have not touched A/F or Timing.
Walbro 255 In-Tank Fuel pump
Dry nitrous Kit only a few bottles ran through it.
Purge and Heater Included, but not installed
Jets for 50, 70, 85, 95, 100, 120 shots. Currently jetted at a 70 shot never used above an 85 shot, but had plans to and I'm sure it would handle the 120 fine with tuning.
Kit has all the normals FPSS, WOT switch, pressure gauge mounted on bottle.
Rear seats are removed in favor of a storage type box with nitrous bottle mounted to it (professionaly done).
Have most of the stock parts still, will be included.
Will also include almost new nitto DRs on salad shooters and 15x8 and 15x7 cragar street stars with BFG DRs on the 15x8s and tires on the 15x7s.
$5000 For everything
Possibly open to partial trades.
Red
manual everything (windows, locks, seats)
Just under 61000 miles
Windows tinted 20% all around
Blackouts all around
Blaupunkt Key Largo CD head unit
Sony 6.5s all around
Manual Fan switch (codes have been disabled via HPTuners)
SLP Intake
RKSport headers
Catco 3" hi-flow cat
Flowmaster 3" catback w/ chrome turndowns
3.42 Gears
LSD
Lakewood Boxed Lower control arms
ES poly torque arm bushing
ES poly tranny mount
Aluminum Driveshaft
NGK TR6s
Taylor Spiro 8mm wires
Tranny was completely rebuilt with high energy components (kevlar, carbon fiber have receipts, shifts fairly hard)
TransGo shift kit
Corvetter Servo
Yank 2800 stall Converter
Flex-a-lite Transmission Cooler
97 PCM Programmed for 3.42s and tire height, fans come on earlier, disabled fan codes and post cat O2 codes, have not touched A/F or Timing.
Walbro 255 In-Tank Fuel pump
Dry nitrous Kit only a few bottles ran through it.
Purge and Heater Included, but not installed
Jets for 50, 70, 85, 95, 100, 120 shots. Currently jetted at a 70 shot never used above an 85 shot, but had plans to and I'm sure it would handle the 120 fine with tuning.
Kit has all the normals FPSS, WOT switch, pressure gauge mounted on bottle.
Rear seats are removed in favor of a storage type box with nitrous bottle mounted to it (professionaly done).
Have most of the stock parts still, will be included.
Will also include almost new nitto DRs on salad shooters and 15x8 and 15x7 cragar street stars with BFG DRs on the 15x8s and tires on the 15x7s.
$5000 For everything
Possibly open to partial trades.
Comment