Hey guys,
Most of you know me from other sites, I don't post here, because I always forget about it. I'm not too bright, sorry. But let's see if any of you need this set up, I'm getting out of the V6 crowd. It's getting to be too expensive.
I am demoding my firebird, would anyone want to buy my headers, up pipe, and down pipe? The only mods you have to make to the under hood is move the
ABS unit to the next forward holes, and mod the heater hoses with 90 deg elbows. It is set up for a T-4 turbo.Also FYI, The headers are 304 stainless, all tig welded, and purge welded, so they won't crack under heat. The up pipe, and down pipe are made out of mild steel. Collectors are normal 3" 3 hole header collectors. And the Flanges on the headers are 3/8" thick mild steel. The downpipe is open at the dump down the firewall, I used a 3" semi band style clamp to connect it to the rest of the exhaust, that way it was easily taken apart.How dose $900 sound? That's for the headers, up pipe, down pipe, and wastegate. I can include the oil pan that has the drain tube welded in it already (I think, depends if a FWD oil pan would work on my car. That's all I have laying around) for $20. And I will give you the intercooler tubes I have (they will need to be modified but it is a start) with the blow off valve on the throttle body tube. Any one want to take it all? I will be starting the strip down this weekend. My decision is final, so It would be ready to be shipped in two weeks, as soon as payment hit me. I can accept Pay Pal if that helps.
O.K. it is getting demodded this weekend. I have also decided to take off the complete 3" exhaust. I will be selling this with the kit without the muffler also if wanted. Same price $900, but it is huge so the shipping will be more expensive. But if you pick it up, it's just an added bounus.
Hit the link below to see pics of the setup and when the car was being built a year ago.
http://pg.photos.yahoo.com/ph/turboj.../ph//my_photos
You can see some partial pics at higher resolution at www.etfabrication.com also
I would also trade this kit for a rolling strait body Mustang notchback. Just to throw it out there.
Thanks
Most of you know me from other sites, I don't post here, because I always forget about it. I'm not too bright, sorry. But let's see if any of you need this set up, I'm getting out of the V6 crowd. It's getting to be too expensive.
I am demoding my firebird, would anyone want to buy my headers, up pipe, and down pipe? The only mods you have to make to the under hood is move the
ABS unit to the next forward holes, and mod the heater hoses with 90 deg elbows. It is set up for a T-4 turbo.Also FYI, The headers are 304 stainless, all tig welded, and purge welded, so they won't crack under heat. The up pipe, and down pipe are made out of mild steel. Collectors are normal 3" 3 hole header collectors. And the Flanges on the headers are 3/8" thick mild steel. The downpipe is open at the dump down the firewall, I used a 3" semi band style clamp to connect it to the rest of the exhaust, that way it was easily taken apart.How dose $900 sound? That's for the headers, up pipe, down pipe, and wastegate. I can include the oil pan that has the drain tube welded in it already (I think, depends if a FWD oil pan would work on my car. That's all I have laying around) for $20. And I will give you the intercooler tubes I have (they will need to be modified but it is a start) with the blow off valve on the throttle body tube. Any one want to take it all? I will be starting the strip down this weekend. My decision is final, so It would be ready to be shipped in two weeks, as soon as payment hit me. I can accept Pay Pal if that helps.
O.K. it is getting demodded this weekend. I have also decided to take off the complete 3" exhaust. I will be selling this with the kit without the muffler also if wanted. Same price $900, but it is huge so the shipping will be more expensive. But if you pick it up, it's just an added bounus.
Hit the link below to see pics of the setup and when the car was being built a year ago.
http://pg.photos.yahoo.com/ph/turboj.../ph//my_photos
You can see some partial pics at higher resolution at www.etfabrication.com also
I would also trade this kit for a rolling strait body Mustang notchback. Just to throw it out there.
Thanks
Comment