Lots of upgrades and cores!

[Nachius]

Well I just picked up a lot of these parts again, but after a LOT of consideration I've decided to sell the majority of them for much needed money and just swap in a stock 3.8 for the time being while my race block is built.

All parts for a 3800 Series II

Comp Cams Cam - $175 (I still owe a friend money for this part)
212º/216º, lobe lifts: .327"/.321", valve lifts with 1.60:1 rocker arms: .523"/.514", lobe separation angle: 113º, intake centerline: 109º
-This is a GREAT N/A cam with the possibility to pickup some good HP if you sprayed it

Stock Heads - Good Condition - $100

Stock Upper and Lower intakes (angled 95-98) pained black with red lettering great for Port and Polish - $125

Steel 1-piece Driveshaft - $45

L67 Connecting Rods - low miles great condition - $35

Trickflow stock length pushrods - $65
- our stock pushrods are "junk" so this is a great upgrade

Comp Cams Lifters - $50

Stock angled throttle body w/ all sensors - $50

Stock Valve Covers - $20 (currently painted red, but need repainted)

MSD DIS-4 with Coil Interface Modules - $200

All prices are OBO and they do NOT include shipping.

If you want everything for a build up I'll cut someone an amazing deal, but the prices are already pretty low. If I find anything else I'll add them here.

PM, email me, or post here!

[camaroz87]

Re: Lots of upgrades and cores!

now is the one piece drive shaft the same one in the ls1 or is it different because that is steel and there is an aluminum one??? also the cam ...would that work with stock internals????? im interested in both

[Nachius]

Re: Lots of upgrades and cores!

The driveshaft is a V8 driveshaft, but is a direct bolt in. It is not as light as the aluminum, but is stronger than the stock 2-piece.

The cam would run on a stock head, but I would suggest upgrading at least to LS6 springs and steel retainers which would run about another $100 to pick those up to be safe.

[zlexiss]

Re: Lots of upgrades and cores!

Are the lifters OE or OE-R's? How many miles on them?

[Nachius]

Re: Lots of upgrades and cores!

I forgot 7k on the lifters and pushrods, and I'll need to check the part number on them again, as I believe they are OE-R, but I'll check.

[Nachius]

Re: Lots of upgrades and cores!

Are the lifters OE or OE-R's? How many miles on them?

I couldn't find a part number on the box of the lifters and can't find the search for where I purchased them quite some time ago, but I never installed them.

Since I'm am not 100% sure I will let the lifters go for $65 Shipped if you're still interested they are still in great condition.

[Nachius]

Re: Lots of upgrades and cores!

I finally searched enough to find it. They are $75 new so I'll go $50 shipped.

http://www.powerandperformancenews.c...ry_Code=heLFTR

Comp Cams 812 Hyd roller lifters

[Shodown]

Re: Lots of upgrades and cores!

Comp Cams Cam - $175 (I still owe a friend money for this part)
212º/216º, lobe lifts: .327"/.321", valve lifts with 1.60:1 rocker arms: .523"/.514", lobe separation angle: 113º, intake centerline: 109º
-This is a GREAT N/A cam with the possibility to pickup some good HP if you sprayed it

What is the 212*/216*? What cam is it (i.e. GT2, GT3, XP)? Is the cam still available? How many miles on it? I am intersted in the pushrods and lifters along with the cam.

[Nachius]

Re: Lots of upgrades and cores!

The cam is an Intense Stage 1x N/A Cam
The powerband is strong from 3,300 to 6,600 RPM

The first 2 numbers are the lobe lifts or how long the valves stay open. The first being intake and the second being exhaust. Mileage on the cam is around 2k and yes I still have it.

I'll sell the cam, lifters, and pushrods for $275 shipped.

[Nachius]

Re: Lots of upgrades and cores!

Updated original thread. DIS-4 and valve covers added.

I will list details later, but I will also have for sale.

HP 2.0 MP digital camera (around $50)
Dell PowerEdge 4400 Server dual PIII 800 Mhz, 512mb mem, scsi drives etc. ($150)
Samsung I330 sprint Palm phone (around $75)

I'm flexible on prices again so if there is any interest make me offers!

[Firehawk N Wv]

Re: Lots of upgrades and cores!

Im interested in the MSD DIS-4 with modules. Would u take 180 shipped to 25537 , Wv.

How many miles is on the box and will it come with all necessary wiring and mounting hardware.

[Seppo Kaitainen]

Re: Lots of upgrades and cores!

you have a pm.

[ssms5411]

Re: Lots of upgrades and cores!

whats the lowest you would go for the heads and upper & lower intakes shipped to 85388?

[Nachius]

Re: Lots of upgrades and cores!

The Mileage on the DIS-4 is unknown to me although I'm assured it was in working order.
It was originally Magnus's, then TealV6s (never on the car), and now it's mine.
Everything needed should be there.

I can do $200 shipped on the DIS-4

I will do $250 shipped on the heads/intakes.

[Firehawk N Wv]

Re: Lots of upgrades and cores!

So it was never Tealv6's car. Will this the setup you have work on a 2001 Firebird? Also can you post a couple of pics of it?