Tweet
Last September I attempted the 3X00 top end swap for my 3.4L, but I failed mostly because I needed to get my car back on the road. There is some fabrication involved with the accessory brackets and custom pushrods are required to work with the hydraulic lifters (FWD has roller cam). That said I have a lot of parts that I'd like to get rid of and they are as follows...
3400 (Gen III) aluminum heads - They were machined buy the guy I bought them from who also said that they were pressure tested.
3100 Upper and Lower Intake manifolds including bolts (the lower intake manifold bolts are brand new from the dealership), fuel rails, injectors, wiring harness for injectors, gaskets(felpro), fuel lines that go with the 3100 fuel rails, and the emissions vacuum lines
3100 Throttle body
3100 valve covers + gaskets and bolts
I do not have head gaskets or head bolts, because I had torqued the heads down which made them worthless, but this is a nearly complete set. I am asking $500 for everything listed shipping included. If anyone is interested I can take pictures.
3400 (Gen III) aluminum heads - They were machined buy the guy I bought them from who also said that they were pressure tested.
3100 Upper and Lower Intake manifolds including bolts (the lower intake manifold bolts are brand new from the dealership), fuel rails, injectors, wiring harness for injectors, gaskets(felpro), fuel lines that go with the 3100 fuel rails, and the emissions vacuum lines
3100 Throttle body
3100 valve covers + gaskets and bolts
I do not have head gaskets or head bolts, because I had torqued the heads down which made them worthless, but this is a nearly complete set. I am asking $500 for everything listed shipping included. If anyone is interested I can take pictures.
