Tweet
This is a perforance forward flowing turbo kit. This kit put down 503 RWHP and 499 TQ with injectors and an upgraded fuel pump (plus tuning) of which are not included in this sale. This keeps the A/C unit. 2 small modifications are needed. You'll have to modify your heating hoses (simple) and simply turn the Power steering resevior around. Reason for selling it is I am going to go a different direction.
What you'll get:
Custom Turbo from FFF
Custom FWD sweeping headers
Master Power T70 Turbocharger (.7 a/r compressor, p trim turbine, .68 a/r t4)
OBX intercooler 30x12x3
Greddy type S BOV
Turbonetics Deltagate Mark II Wastegate
The turbo was just re-built and has less than 100 miles on it.
I will Coat hot side piping (I'll have them coated before i send them to you so you can pick the coating you want. 2400 degree coating that is only in gold or a 2000 degree coating that is in satin black)
Price for all the above: is $ 3500 Additions can be added for a price, see below...
I can get teh cold side piping coated at the same time as the hotside for an additional 350.
I will include the eclectric cut out (which is welded to the downpipe ATM (Vbands on both sides) add 300
I will include the motron 65LB injectors for an additional 400
I will include the Greddy Profec B Boost controller for an additional 200
I just purchased all new silicon and T-bolt clamps I'll include @ 190. The kit comes with all the silicon you'll need but they are older peices and older clamps.
What you'll get:
Custom Turbo from FFF
Custom FWD sweeping headers
Master Power T70 Turbocharger (.7 a/r compressor, p trim turbine, .68 a/r t4)
OBX intercooler 30x12x3
Greddy type S BOV
Turbonetics Deltagate Mark II Wastegate
The turbo was just re-built and has less than 100 miles on it.
I will Coat hot side piping (I'll have them coated before i send them to you so you can pick the coating you want. 2400 degree coating that is only in gold or a 2000 degree coating that is in satin black)
Price for all the above: is $ 3500 Additions can be added for a price, see below...
I can get teh cold side piping coated at the same time as the hotside for an additional 350.
I will include the eclectric cut out (which is welded to the downpipe ATM (Vbands on both sides) add 300
I will include the motron 65LB injectors for an additional 400
I will include the Greddy Profec B Boost controller for an additional 200
I just purchased all new silicon and T-bolt clamps I'll include @ 190. The kit comes with all the silicon you'll need but they are older peices and older clamps.
Comment