well i cranked the crank and spun a main so i am possibly getting rid of alot performance parts. just checking to see if i should do this so let me know if your interested.
stattama stage 2 cam thinking 200
comp valve springs and locks 75$
comp retainers 20$
two sets of port and polished heads one has 3/8 rocker bolts to keep from breaking them at high rpms one set of heads has mild rust from sitting in the pole barn and will need rebuilt the other i will be pulling off. that one has the valves with it but unless you are buying springs and retainers also it will not include these, the rusted ones bare. rusted one can be cleaned with steel wool it is so light 100 plus shipping for the rusty ones 300 plus shipping for the clean ones
one set of cometic gaskets used to achieve a 9.2 compression ratio i think.072 is thickness 75$
comp push rods 50$
port and polished intakes upper and lower 150$
43.5 lb/hr injectors 150$
walbro 255 pump 75$
roller timing set 60$
head studs torqued once 40$
forward facing headers now i will say these were not build with the best in mind. They designed for my car only and eliminated the ac and you will need a oil filter adapter also these are not a end all bolt on and go they have been repaired several times. i am not even sure if i will be selling them but if someone needs them we will talk.
ported throttle body (electronic) without maf 50$
ported ls1 maf 50$
these are the only things i can think of right off hand but keep in mind i am just looking to see if there is enough interest. if there is not i don't mind all prices do not include shipping and i think i am being fair on everything here
stattama stage 2 cam thinking 200
comp valve springs and locks 75$
comp retainers 20$
two sets of port and polished heads one has 3/8 rocker bolts to keep from breaking them at high rpms one set of heads has mild rust from sitting in the pole barn and will need rebuilt the other i will be pulling off. that one has the valves with it but unless you are buying springs and retainers also it will not include these, the rusted ones bare. rusted one can be cleaned with steel wool it is so light 100 plus shipping for the rusty ones 300 plus shipping for the clean ones
one set of cometic gaskets used to achieve a 9.2 compression ratio i think.072 is thickness 75$
comp push rods 50$
port and polished intakes upper and lower 150$
43.5 lb/hr injectors 150$
walbro 255 pump 75$
roller timing set 60$
head studs torqued once 40$
forward facing headers now i will say these were not build with the best in mind. They designed for my car only and eliminated the ac and you will need a oil filter adapter also these are not a end all bolt on and go they have been repaired several times. i am not even sure if i will be selling them but if someone needs them we will talk.
ported throttle body (electronic) without maf 50$
ported ls1 maf 50$
these are the only things i can think of right off hand but keep in mind i am just looking to see if there is enough interest. if there is not i don't mind all prices do not include shipping and i think i am being fair on everything here
Comment