8 second v6 fbody part out list - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

8 second v6 fbody part out list

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 8 second v6 fbody part out list

    Drivetrain

    Intense 8.0:1 Race block bored .060 1800.00
    Intense Stage 4 heads 1500.00
    GenIII 1.7 adjustable roller rockers 250.00
    Intense Stage 4 turbo cam 200.00
    ATI Turbo balancer 375.00
    Miezere polished electric waterpump 180.00
    Intense oil relocation kit with lines and all 200.00
    Ported Aussie LIM and cutom upper with LS1 TB 700.00
    ATI TH350 reverse manual valve body with aluminum deep pan and transbrake 800.00
    Custom ATI 9 inch convertor 600.00
    STS cheetah air shifter with co2 bottle, actuator and rpm box 250.00
    4inch Driveshaft Shop aluminum driveshaft with 1350 u-joints 200.00
    9inch Ford big bearing rear end setup with 4link and sway bar. Strange case with 3.50 Pro gears and 35 spline Moser axles. Aerospace Brakes with aluminum 4 piston calipers. 1750.00
    2 GT35R Ball bearing turbo's oil and liquid cooled 1000.00 each
    Custom turbo headers 700.00
    Custom W2A 2500hp rated IC 18X18 1000.00
    2 Tial 38mm black anodized waste gate 240.00 each
    Miezere 20 gpm water pump for IC 150.00
    Adapter plate to make 3800 series II fit TH350, 400, powerglide, and 700r4 650.00


    Fuel system

    Weldon 2325A fuel pump 500.00
    PRJ rails (aluminum) only 200.00
    Aeromotive Fuel pressure regulator 125.00
    160lbs low impedance injectors 350.00
    5 gallon fuel cell 50.00

    Electrical

    Autometer Sport Comp electrical
    Oil pressure 35.00
    Water temp 35.00
    Trans temp 35.00
    Boost 35psi 50.00
    Voltage 35.00
    Fuel psi 150.00
    Dual intake temp 200.00
    Tach with shift light 50.00
    Innovative Turbo MSBC1 electronic boost controller 500.00
    LT1 mass air flow 100.00
    MSD DIS4 H.O. box 400.00
    MSD coils with adapters 150.00
    AEM 10 channel low impedance injector driver 200.00


    Suspenseion

    Strange Rear adjustable coil over shocks 200.00
    QA1 Front Adjustable coil over shocks 300.00
    BMR Tubular k-member with polished manual steering rack 350.00
    BMR Tubular Lower control arms 250.00
    BMR Tubular Upper control arms 200.00
    Weld Racing 15X12 Draglites 350.00
    Weld Racing 15X3.5 Draglites 200.00
    Mickey Thompson 29.5X13.5 ET Drags 300.00
    Micket Thompson 26X4.5 Front runners 180.00


    Brakes

    Aerospace race brakes with 4 piston calipers on all 4 corners 600.00
    Strange Mastercylinder with line lock and adapter for 98-02 f-body 200.00

    Chassis

    98 Pontiac Firebird t-top. Kirky aluminum race seat with red cover
    Full cage, back halfed, 4 linked, chassis certified to 8.50


    Still has power windows, Wolfe racecraft aluminum door panels, Aluminum steering column, Grant steering wheel with button holes and splined quick disconnect.
    Simpson 5 point harness, Simpson parachute. Backlite Painless switch panel, wheelie bars and lexan front glass. VFN 5inch ws6 hood to windshield. 5000.00
    Last edited by Highhp; 11-23-2008, 03:54 PM.

  • #2
    Re: 8 second v6 fbody part out list

    does that aussie lim and upper fit on our motor without a ton of fabricating?

    Comment


    • #3
      Re: 8 second v6 fbody part out list

      It fits just like it should. No fab needed to bolt down.

      Comment


      • #4
        Re: 8 second v6 fbody part out list

        any modification needed to fit the shocks on the rear?

        Comment


        • #5
          Re: 8 second v6 fbody part out list

          this is sad.
          Y87 Package
          MANUAL CONVERTED, Pro 5.0 Shifter
          Pacesetters, Magnaflow Cat, Cutout, Flowmaster

          MOGOB APPROVED!
          BONE APPROVED!
          VANBIBBER APPROVED!
          KRISTEN APPROVED!


          Vice Prez.
          Team Black...TEAM EMO
          sigpic
          Come on kids! Get a Calendar!

          Comment


          • #6
            Re: 8 second v6 fbody part out list

            why is this happening

            Comment


            • #7
              Re: 8 second v6 fbody part out list

              Could you PM me a phone number and a good time to call? I am interested in some parts.

              Comment


              • #8
                Re: 8 second v6 fbody part out list

                Is this still being parted out?
                08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                Comment


                • #9
                  Re: 8 second v6 fbody part out list

                  dude you are the one with the 8 second firebird i saw on youtube!!! omg =( your getting rid of it! that car is so sweet. atleast put the video back up on youtube =(

                  Comment


                  • #10
                    Re: 8 second v6 fbody part out list

                    can you send me a pic of the tach/shift light and the seats ?

                    Comment


                    • #11
                      Re: 8 second v6 fbody part out list

                      how aggressive is that turbo cam?

                      Comment


                      • #12
                        Re: 8 second v6 fbody part out list

                        Originally posted by Fondle View Post
                        how aggressive is that turbo cam?
                        I highly doubt it would be streetable and therefore not useful for your setup.

                        http://www.intense-racing.com/Mercha...egory_Code=HCV

                        The Stage 4 Turbocharged Cam is the most agressive grind available with a strong powerband between 3,500 and 7,200 RPM and should be used with our INTENSE™ Stage 3 CNC L67 Cylinder Heads. With any of these choices, you will need to use a higher stall torque converter, such as our INTENSE™ 245 mm. Extreme Duty (TCS-375 or TCS-400) Torque Converter.

                        * CAM-903 - INTENSE™ Stage 4 Turbo Cam, duration @ .050": 226º/218º, lobe lifts: .343"/.346", valve lifts with 1.60:1 rocker arms: .549"/.553", lobe separation angle: 116º, intake centerline: 110º
                        By the way, you guys should double check the post date on this thread. It's from last year.
                        '99 Camaro
                        '04 Saab 9-3 Aero
                        '90 Audi Coupe Quattro

                        Comment

                        Latest Topics

                        Collapse

                        FORUM SPONSORS

                        Collapse
                        Working...
                        X