97 Programmable PCM

[Unique96Camaro]

Im looking for a programmable 1997 PCM. I am starting a engine and turbo build and my 96 pcm i have been told can not be programmed. So i am looking let me know if you have one thanks.

[SixShooter'00Camaro]

Re: 97 Programmable PCM

If you are buying a 3.8 motor like you asked about try to buy the motor with the pcm.

[Unique96Camaro]

Re: 97 Programmable PCM

If you are buying a 3.8 motor like you asked about try to buy the motor with the pcm.

It would be out of a 01 camaro would that plug right up?

[techsan23]

Re: 97 Programmable PCM

Ive got a 97' pcm. I had to plug a new vin# into it so it would work for a manual trans. Are you running a manual? It would also need to be re-tuned before you could use it because it is scaled for #36 injectors.

[Unique96Camaro]

Re: 97 Programmable PCM

Ive got a 97' pcm. I had to plug a new vin# into it so it would work for a manual trans. Are you running a manual? It would also need to be re-tuned before you could use it because it is scaled for #36 injectors.

No i have automatic.

[techsan23]

Re: 97 Programmable PCM

Your either going to have to find one out of an auto, or have someone flash a vin into the pcm for an auto. I honestly dont know if you could use a newer unit than a 97', but just make sure you dont get one thats designed for drive by wire.

[Unique96Camaro]

Re: 97 Programmable PCM

Your either going to have to find one out of an auto, or have someone flash a vin into the pcm for an auto. I honestly dont know if you could use a newer unit than a 97', but just make sure you dont get one thats designed for drive by wire.

How would i know if its drive by wire?? And what is that and if i buy yours how do i change it to auto.

[v6droptop]

Re: 97 Programmable PCM

I have a virgin 98 for auto
dont know if they will interchange
have the wiring harness connector attached too.
PM me if interested

[techsan23]

Re: 97 Programmable PCM

How would i know if its drive by wire?? And what is that and if i buy yours how do i change it to auto.

I believe DBW was used from 99-02 on our cars. Its where the throttle is electronically controlled rather than mechanically driven by a cable. The only way to change a pcm from manual to automatic is to put a vin# into it that is for an auto. I originally got one from pcmforless, and it ended up being for an auto. I had to take it to the dealership and they put a different vin# in it for me. Ive seen people online that do this service for $50-$75. Ive also heard that the pcm needs to be left unlocked in order to access it via hptuners.

[Unique96Camaro]

Re: 97 Programmable PCM

I believe DBW was used from 99-02 on our cars. Its where the throttle is electronically controlled rather than mechanically driven by a cable. The only way to change a pcm from manual to automatic is to put a vin# into it that is for an auto. I originally got one from pcmforless, and it ended up being for an auto. I had to take it to the dealership and they put a different vin# in it for me. Ive seen people online that do this service for $50-$75. Ive also heard that the pcm needs to be left unlocked in order to access it via hptuners.

Alright i know what your talking about well is yours unlocked and how much would you sell it for considering i need to go get it changed at the dealer