WTB: 98+ 3.8 HEADS AND INTAKES

[WickEdSix9838]

Originally posted by Mr. Spock:
I've got two sets of heads. One untouched the other I started polishing the chambers on one of the heads. Will have three sets for ya once I pull the engine.

What year model are the heads?

[Mr. Spock]

I thought all the L36 heads were the same. I don't know what year they came off, but both are L36. Does anyone know how to tell?

[WickEdSix9838]

Originally posted by Mr. Spock:
I thought all the L36 heads were the same. I don't know what year they came off, but both are L36. Does anyone know how to tell?

the 95-97 heads have an injector boss casting spot in the top of the intake port where an injector could go if it was drilled through. Just look into the intake port and it should be right by the edge. If it is just flat, then they are 98+ heads. I only want the 98+ sets.

[kristen]

i have a set of 2001 v6 3.8 stock headers for sale if anyone needs them i also have a stock y pipe with cat plus a stock itake lid and air sliencer

[FirebirdGT]

Originally posted by WickEdSix9838:
I also need another upper/lower intake from a 95-98 year model. Let me know!

I have a upper and lower for 95-98. E-mail me if you want them.

[Paul Ford]

Originally posted by WickEdSix9838:
Paul Ford, how much do you want for the 2000 upper intake? Also if anyone else has some 98+ heads let me know, im still looking for more. I also need another upper/lower intake from a 95-98 year model. Let me know!

how about 50 bucks plus shipping

[carmelcarswholesale]

kristin...how much for the stock 2001 exhaust manifolds and y pipe? Thanks, Richard