WTB: M5 conversion parts

[99BlackW68]

Heres the list of what I need. email me at dhiser@purdue.edu if you have any of these for sale.

-tranny /w bellhousing
-clutch, flywheel, preasure plate
-clutch master cylinder /w clutch reservior gm# 12555144
-slave cylinder /w throw out bearing
-pilot bearing
-shifter
-shift knob
-center console insert
-leather shift boot
-lower shift boot
-vss
-t-5 torque arm bracket/mount
-t5 cross member gm
-brake pedal
-clutch pedal assm
-M5 PCM
-lots of new bolts
-reverse lights switch leads
-clutch safty switch, pigtail leads
-tranny mount

[Meatyshells]

Re: WTB: M5 conversion parts

doing a swap it looks like?
well i have a used master cylinder, mayb 200 miles on it at most. $25
also have a used spec stage 1 clutch also 200 miles on it.$100
comes with clutch disk, preasure plate, pilot bearing, and alinement tool.
Took out the master because i thought it was bad, replaced it with a new one and still had the problem. So i have this perfectly good master just sitting here. So then i took out the clutch thinking it was the problem, replaced it with a stock clutch. But the problem was i didnt torque the preasure plate bolts to spec. And i really dont want to pull the trans again to put the spec clutch back in.

you can use the vss from your auto in the manual if you want
and the brake and clutch pedal is one part

[White95]

Re: WTB: M5 conversion parts

i think i still have some pedals laying around

[crushedout]

Re: WTB: M5 conversion parts

Heres the list of what I need. email me at dhiser@purdue.edu if you have any of these for sale.

-tranny /w bellhousing
-clutch, flywheel, preasure plate
-clutch master cylinder /w clutch reservior gm# 12555144
-slave cylinder /w throw out bearing
-pilot bearing
-shifter
-shift knob
-center console insert
-leather shift boot
-lower shift boot
-vss
-t-5 torque arm bracket/mount
-t5 cross member gm
-brake pedal
-clutch pedal assm
-M5 PCM
-lots of new bolts
-reverse lights switch leads
-clutch safty switch, pigtail leads
-tranny mount

Where are you located? If your willing to come pull stuff yourself I have everything you want.

[99BlackW68]

Re: WTB: M5 conversion parts

Yeah I'm planning on doing this swap, and am gathering all the parts for it now. Im located in Fort Wayne, Indiana. Where are all you guys located at? Yeah I'm interested in the master and spec clutch. Also in the pedals. The spec clutches have "stages", which stage do you have? Thanks for your help guys.

[Meatyshells]

Re: WTB: M5 conversion parts

it says stage1 lol, but im pretty sure i just sold it

[White95]

Re: WTB: M5 conversion parts

if you want the pedals let me know email me

[99BlackW68]

Re: WTB: M5 conversion parts

it says stage1 lol, but im pretty sure i just sold it

dammit, i wanted that too haha. if whoever backs out ill take it off your hands.

[loser]

Re: WTB: M5 conversion parts

heres what I have on your list,
-tranny /w bellhousing
-clutch, flywheel, preasure plate
-slave cylinder /w throw out bearing
-pilot bearing
-shifter
--t-5 torque arm bracket/mount
-t5 cross member gm
-M5 PCM
-vss
-tranny mount

make me a decent offer and send me your zip code and Ill get you a shipping quote. ....there was absolutely nothing wrong with the transmission, I bought the car and did a ls1 t56 swap, the clutch in it is also new but I do not know what brand, Id imagine nothing good the car didnt have anything aftermarket on it.

[loser]

Re: WTB: M5 conversion parts

forgot I left the pilot bearing in the engine and sold it, you can get one at any parts store for less then $10.

[crushedout]

Re: WTB: M5 conversion parts

I'm 15 minutes from Louisville, KY city limits

[99BlackW68]

Re: WTB: M5 conversion parts

Loser, where are you located? How many miles are on the tranny and the clutch? I only want a new clutch.

You say you have everything Crushed?

[crushedout]

Re: WTB: M5 conversion parts

Loser, where are you located? How many miles are on the tranny and the clutch? I only want a new clutch.

You say you have everything Crushed?

If you want to pull it all, then you can have the parts out of my car. I'll help you out and have basic tools. I've been pondering the idea of parting it out but getting rid of transmission and engine will be the hardest due to shipping and lack of equipment to pull these large heavy items myself so if I can get one of them sold then I will part the car out. Car runs and drive right now, minus a flat tire and no PHB so hard cornering is out.

[99BlackW68]

Re: WTB: M5 conversion parts

how many miles are on the tranny?

[crushedout]

Re: WTB: M5 conversion parts

I beleive its original so 150k. The clutch has 35k ish