Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If I wanted to I could get the exact numbers I had them once but just writen down and sloppy so I couldn't read it but right now im not worried about it till I get ready to put in the procharger.
with the amount of money into this "said" build, you would think you would know just a little bit more about the car than what you claim...just a little bit...
and if this shop knows soo much about builds, why would they build your motor to 10:1 CR, and then decide lets put a charger on?
and where the hell did all these strokers come from?? this is not a mod like a cam, you dont just slap it in and go...plus they're damn near 4grand...and you hardly have the supporting mods for it...doesnt make sense....
Mine was 5k to do and o wasn't planning on charging it till about 2 months after I got it done. I can still take it up to about 10lbs yet. I talked to a guy who has a 8sec f-body actually has the fastest v6 and he has 1 big turbo but did have a twin just for a little more info lol.
Also with all do respect I was in iraq when I had the car sent to the shop and basically told them to do what they could all motor and even turned down a 305 stroker. Not sure if I regret that but I always like to have something different.
The guy who built it doesn't give exact specs cause he doesn't like to have others know how he builds engines the way he does.
This does nothing but throw up red flags in my mind and you couldnt have expected any of us to react to this any other way. Didn't you know, its not nice to keep secrets, lol.
Anyway like Mogobs siad your welcome to spend your money as you like. But for 5 grand I better have a printed sheet with all the information on my build in my hand.
OP, you gotta know everyone that is anyone around here knows what the hell is going on. I myself have been building engines for myself and other people for years, (not 3.8's, but air cooled vw) and the main thing people want when they get a far from stock engine, is a build sheet. I don't put down tricks and tips, just the basics; piston size, rod length, crank size, bearing sizes, cam lift/duration/LSA, combustion chamber cc, port cc, rocker ratio. They don't need to know what I do to what part to make more power, that's my lil ace in the hole, although if you took it apart and knew where to look then you might see what I did. My point here is you cant come around here and feed BS to people who know what the hell they are talking about...just doesn't work that way.
Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
Anyway like Mogobs siad your welcome to spend your money as you like. But for 5 grand I better have a printed sheet with all the information on my build in my hand.
X2
If you just put more money than your car is worth into an engine you better hope you know what's in it.
In America's Hat!
1997 Camaro 30th 'vert... GT1 cam/C6 wheels/Flowmaster/HIDs/Viper 2 way alarm/Alpine audio mods up the wazoo
2005 Equinox LT... mostly stock daily/Thule snowsports roof system/sound + interior mods
This does nothing but throw up red flags in my mind and you couldnt have expected any of us to react to this any other way. Didn't you know, its not nice to keep secrets, lol.
Anyway like Mogobs siad your welcome to spend your money as you like. But for 5 grand I better have a printed sheet with all the information on my build in my hand.
Been busy with work, and also not working. It's been an interesting year. We need to get some beers and catch up.
#1:1999 pewter metallic y87 rs A4 camaro.check out the pics on the link below<br />#2:Bright red 1979 Pontiac Trans Am. Brand new 400 cubic inch Pontiac Motor. All work done by me, except the engine work.<br /> <a href=\"http://www.cardomain.com/ride/2216133\" target=\"_blank\">http://www.cardomain.com/ride/2216133</a>
Mine was 5k to do and o wasn't planning on charging it till about 2 months after I got it done. I can still take it up to about 10lbs yet. I talked to a guy who has a 8sec f-body actually has the fastest v6 and he has 1 big turbo but did have a twin just for a little more info lol.
Also with all do respect I was in iraq when I had the car sent to the shop and basically told them to do what they could all motor and even turned down a 305 stroker. Not sure if I regret that but I always like to have something different.
Sent from my MB860 using Tapatalk
There is NO WAY you have what you say you have in that car for 5,000$ with labour.
The machine work required to put a stroker in, the cost of high compression pistons is damn near 1000$ by the time you get rods and everything needed...the cost of having the bottom end balanced, spec'd, blue printed, the cost of a cam and all related hardware needed to run it, buddy, your over 5,0000$ in parts never mind labour costs...it doesnt make sense....I know this because I just finished looking into pistons, AND a stroker kit when I blew my motor and replaced it.
Also he has all of the equipment required so that makes it cheaper for him not counting how much that equiment cost which is actually crazy. Several million.
Hey im just saying that's how much it cost me and maybe he gets a discount due to buying from certain people all the time I will try to get a build sheet and post it but its kinda hard being in va and he being in pa lol.
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment