Originally posted by speedracer95v6:
</font><blockquote>quote:</font><hr />Originally posted by camaro_speedemon:
Maybe you should do a little research before bashing Rx7's
They are quite possibly one of the best handeling cars ever made. Not to mention an LS1 Swap RX7 will do pretty much low 11's.
While Camaros are overall good cars, a stock RX7 will hand an Fbody its *** on a road course.
</font><blockquote>quote:</font><hr />Originally posted by camaro_speedemon:
Maybe you should do a little research before bashing Rx7's
They are quite possibly one of the best handeling cars ever made. Not to mention an LS1 Swap RX7 will do pretty much low 11's.
While Camaros are overall good cars, a stock RX7 will hand an Fbody its *** on a road course.
The look sweet (like a C5 vette), but if I wanted a car that looked like a C5 vette, I would get a C5 vette. However, their little wankel is nifty as ****. </font>[/QUOTE]You realize the 3rd gens were out about 4 years before C5's were right?
A stock RX-7 will make an Fbody it's ***** on a road course, as well as a regular C5 (non-Z06).
Originally posted by BirdOfPrey01:
N/A RX-7's do not run 14's
They run high 17's mid 18's
2nd gen turbo rx7's bearly break 14's
3rd gen turbo rx7's bearly break 13's unless they are twin turbo which generally make a consistant mid to high 13 second pass.
The rotary engine is over rated, the only thing that makes it so great is the fact you can build them up cheaply blow them up and build another cheaply.
Other than that, its not that great of an engine without a turbocharger.
N/A RX-7's do not run 14's
They run high 17's mid 18's
2nd gen turbo rx7's bearly break 14's
3rd gen turbo rx7's bearly break 13's unless they are twin turbo which generally make a consistant mid to high 13 second pass.
The rotary engine is over rated, the only thing that makes it so great is the fact you can build them up cheaply blow them up and build another cheaply.
Other than that, its not that great of an engine without a turbocharger.
NA RX7s are slow as piss.
2nd gen Turbo II's are mid 14's stock. What's so over rated about a 1.3L engine pushing 250HP stock?
Cheaply build a rotary [img]graemlins/rofl.gif[/img] Rotory's are very expensive. The mechanics that know how to work on them are few and far between.
Comment