Crazy sub - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Crazy sub

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Crazy sub

    So this is my proof to everyone that my sound system is really crazy. I drove up north 200+ miles and got my system done by batman's uncle who did alot of stuff to the whole system. But for the sub he wired the stock face plate to have preouts and put a wonderful amp on it that he modified to have more power which he attaced to my 10 inch L7 that i have in my stealth box.
    Well i was bumbing along the other day, and i thought i blew the sub, boy was i pissed! I had to drive for 3 hours so i stoped at my house and got out to see what the deal was. I checked it out because it jsut sounded like it was just hitting rediculously loose. I checked the surrounding and it was fine, you know what was wrong? It shook its way out of the fing box! It blew the damn screws right out of the damn wholes they were in and the sub was just blowing around which is why it was sounding so loose.
    So i got some bigger screws and srewed her back in until i can find a better thing to do i am just going to play it really soft.
    But i think that is pretty crazy if you ask me! And all out of my little 10!
    2002 M5 camaro- VTR CAI, custom cat-back exhaust, battery compacitor, pullie, lowering springs, 32mm sway bar, cross-drilled slotted rotars. 1-10\" L7 in cubby.

  • #2
    get some bolts & self locking nuts
    1978 Formula 461 in progress of being built :rock:
    2013 Ram 1500 Big Horn

    former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
    94 comero 3.4

    Comment


    • #3
      hA I have a 10 solobaric and its not THAT loud!!! if ya ask me!! i want more!!!!!! hehe

      Comment


      • #4
        Maybe you need to have it rewired like i did. I used to not like it that much, until i went to a specialty shop, got it dialed in, pumped and put on to a sick D block mono amp.
        2002 M5 camaro- VTR CAI, custom cat-back exhaust, battery compacitor, pullie, lowering springs, 32mm sway bar, cross-drilled slotted rotars. 1-10\" L7 in cubby.

        Comment

        Latest Topics

        Collapse

        • Dongrossmd
          Throttle Position Sensor trouble shooting
          by Dongrossmd
          I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
          2 weeks ago
        • ssms5411
          New stereo
          by ssms5411
          Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
          3 weeks ago

        FORUM SPONSORS

        Collapse
        Working...
        X