Tweet
take it to a tech shop (not best buy, a local shop that does it's own work) and ask them if they can plug a POST code reader in real quick. my work does it all the time it can tell you if you need new ram, a chip shorted, etc.
-
-
Make sure any PCI cards that you installed (USB 2.0 Card) are seated all the way. If you installed an AGP card, make sure it's seated properly as well. Make sure the CPU fan is properly secured. Check RAM to make sure it's seated properly. If all else fails, take it to a pro. So far, that's all I can come up with.
Troubleshoot it by removing both new installed cards to see if they are the one's causing you problems. That would mean they were not seated right or are not compatible.Comment
-
takeing the battery out on mobos does not always clear the setting you accually have to use the jumper, it erase's it with power from the battery.....
also for board with on board video there is ually a jumper AND bios setting to change
you really need to find the manual for the mobowww.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...3 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...3 weeks ago
Comment