still not starting!

[UDLOSE98]

Re: still not starting!

stock length

[DAS BOOT]

Re: still not starting!

Did you put a cam in? or do something with the timing chain?


Also its dumb but always worth a check, verify that the wires are hooked up right. I once did plugs, wires, and a bunch of other things and the car woudldn't crank over, my dumbass put the wires on wrong.


also get one of those spark testors to verify spark is getting to each cylinder.

[UDLOSE98]

Re: still not starting!

Did you put a cam in? or do something with the timing chain?


Also its dumb but always worth a check, verify that the wires are hooked up right. I once did plugs, wires, and a bunch of other things and the car woudldn't crank over, my dumbass put the wires on wrong.


also get one of those spark testors to verify spark is getting to each cylinder.

yea...the cam is in my sig

the wires are all correct they were checked a million times, and i test for spark

Im really convinced it is a timing error.

[v-6dailydriver]

Re: still not starting!

sounds like timing 180 out, buttttt i dont how you can do that w/o a distributor. unless the cam is 180 out??? (if thats even possable)???

[Turbo V6 Camaro]

Re: still not starting!

yea...the cam is in my sig

the wires are all correct they were checked a million times, and i test for spark

Im really convinced it is a timing error.

only way timing is out is if the cam is off...... the PCM fires the cylendars using the crank sensor for timing (make sure thats pluged in)

[slow6]

Re: still not starting!

What does the PCM use the Cam sensor/ interruptor for?

[Turbo V6 Camaro]

Re: still not starting!

What does the PCM use the Cam sensor/ interruptor for?

timing over 3000 rpm

[UDLOSE98]

Re: still not starting!

crank sensor is without a doubt plugged in