spring mod plans?

[SpeedingFirebird]

Re: spring mod plans?

Eibach Pro kit, Konis, 3.42's with LSD.

[Bonemaro]

Re: spring mod plans?

Eibach pro kit
LSD
shocks
LCA & brackets
hot pink paint and leopard skin interior

[slow6]

Re: spring mod plans?

you forgot fart can

[Bonemaro]

Re: spring mod plans?

Can't forget that!!:)

[loser]

Re: spring mod plans?

i have nothing else to do. so i will just up my nitrous and get a good tune

you have lots of stuff you can do, 12 bolt, DR's, built tranny, forged motor, more gear ( 4.10's )

[Fireball27]

Re: spring mod plans?

I've already got my spring mods sitting in boxes: BMR sbcs and a 32mm SLP sway bar

[99orangecamaro]

Re: spring mod plans?

newly rebuilt spare motor with: total seal rings, clevite trimetal bearings, removed balance shaft, comp cams custom grind cam, 1.7 roller rockers, comp OE-R lifters, ls6 valve springs, comp hi tech pushrods, spec clutch, and port and polished heads. and finally gonna get around to putting on the pacesetters and walbro fuel pump thats been sitting in the garage for about 6 months. and a good tune some time this summer hopefully

[slow6]

Re: spring mod plans?

you have lots of stuff you can do, 12 bolt, DR's, built tranny, forged motor, more gear ( 4.10's )

yea, she could get in the 11s at least... i know, easier said than done

[99pewterv6]

Re: spring mod plans?

magnaflow cat-back
billet grill
shocks
dont know of anything else yet..

[Earnhardt132000]

Re: spring mod plans?

OEM clutch install, tune up. Nothing else, she has too many miles to start adding anything the motor. And I figure if the motor does go, I don't want any other mods to be left sitting in an immobile car.

[TheGr8Schlotzky]

Re: spring mod plans?

-C5 rims (gunmetal or chrome) !!vote on my cardomain, help me out!!
-lowering springs (undecided on brand)
-bilsteins
-LCAs/LCA relocation brackets

if there is possibly any money left, there is plenty more, that's just my goal..i'd be happy with just wheels though.

[Oi Bird V8]

Re: spring mod plans?

thats another thing i need..tires :( dammmmn

[97rs4life]

Re: spring mod plans?

Purchased, waiting to install:

Umi LCAs
ES poly PHB bushings
1le trans mount
ES poly Torque Arm Bushing
Crane Timing Retard Controller "Happy Knob"
Pass. Side window motor
wipers
Rear tires
window switch piece that cracked

Engine Bay
Clean up some wiring
!Pass wire mod
!Hood latch cable
Detail engine bay
Remove hood matting

Things to sell
Powerdyne kit
FMU 6:1 ratio
Stock LCAs

Things to buy
hmm....on the DL for right now. Need to sell the above stuff first
Dyno time

Things to make
Rear seat delete and mount bottle onto it
New NA tune

[98 3.8]

Re: spring mod plans?

1. 3.73s, LSD
2. Install GT2, Rollmaster, OE Lifters, hardened pushrods (already ordered!)
3. hptuners
4. Finish interior work

[DAS BOOT]

Re: spring mod plans?

Gonna try and score a set of Bullits with tires this weekend at FFW

-cermamic longtubes
-no CATS
-if my H pipe doesn't work, then an X or H.
-maybe swap out the Blowmasters
-upper/lower intake, TB
-injectors

find out what gears, I have then get into suspension/tire drop more weight if I can.

then maybe nitrous, or consider a blower...



as for the v6...
-if it needs tires or I find cheap used tires going to put them on some painted SS-10spokes.
-picking up a used ls1 catback today for free.