Tweet
what would you to your car......i dont know what id do...im debating on whether to make my car faster or use that 2k towards a street bike....im in a pickle
-
....WHITE CAMARO CLUB....? =( -
Re: IF you had 2000$......
me? i would buy a ram air hood for my 3.4 and probably throw on some nitrous. -
Re: IF you had 2000$......
A mean cam and aluminum roller rockers (and supporting mods of course).Comment
-
Re: IF you had 2000$......
That would depend on the current mods on your car and your goals for it.
A newer 600cc street bike will be faster than your car ever will, but also more dangerous and only usable part of the year.
IF I had a stock 3.8 Camaro and $2000 That I had to make it faster:
First I'd hope it was a Y87 so I had 3.42s and LSD
I'd probably buy everything used to begin with, but here goes!
SLP Intake - $150
RKSport Headers - $300
Straight Pipe - ? I know a shop ?
Flowmaster 3" Catback - $250
Automatic - Stall converter/Manual - Spec/Centerforce clutch - $500
Dry Nitrous Setup - $400
Drag Radials on Salad shooters - $300
Lower Control Arms - $100
Total = $2000 and I estimated on the high side on some of that used........because you still need gaskets, fluids, etc.
Stock to solid 13 second car 2k possible 12s depending on nitrous shot and racing conditionsComment
-
Re: IF you had 2000$......
Not to be an *** but take the $2000+your v6 and get a Z or T/A.1995 Patriot Red T-Topped Z28 A4<br /><br />Mystery rebuild in progress.<br /><br />Soon to have 383 ways to beat KBreezy and Shane. :DComment
-
Re: IF you had 2000$......
Save more and get a stroker kit :D~97 3.8L V6 Camaro~
A few things
Only Member of Team Hooker?!?Comment
-
Re: IF you had 2000$......
i probably wouldnt do anything performance wise, maybe a nice set of rims, tires, and brakes.
i know im going to get flamed for this, but i would never put any performance mods on a v6 camaro, unless they are transferable to an ls1Comment
-
Re: IF you had 2000$......
abbott stage 3 heads and valve train
Comment
-
Re: IF you had 2000$......
3.4 start rebuild engine and trans, 3500 top end swap, cam, lifters, headers, shift kit for the trans and aluminum driveshaft.Comment
-
Re: IF you had 2000$......
i have a 3.8 01 camaro...i ahve a magnaflow 2.5 exasut and lid...im leaning towards a cam ....but would 2,000 be enough for it and supporting mods?
im thinking about this cam..
http://www.3800performance.com/Merch...roduct_Count=4
would this cam be good?
how would the idle and driveability beLast edited by mattyacks; 01-18-2008, 03:42 AM.....WHITE CAMARO CLUB....? =(Comment
-
Re: IF you had 2000$......
full intake, full exhaust, gears, and nitours!WAWA-A-HOLIC
Comment
-
Re: IF you had 2000$......
Pay off 2 bills...Let's flip a coin. Heads I get tail, Tails I get head.Comment
-
Re: IF you had 2000$......
I bought a supercharger with my 2K i had. :)1998 Red T-top V6 Camaro
- K&N Filter, Pacesetter Headders, MagnaFlow 2.5" Hi-Flo Cat, FlowMaster 80 Series, PowerDyne Supercharger@9Psi
More 2 ComeComment
-
Re: IF you had 2000$......
i never knew our cars had roller camsComment
-
Re: IF you had 2000$......
I've got the GT2 cam. Total for the install for me was just under $1K, including gaskets and all. If I were you, I'd also get a used set of heads to clean up, or even have a machine shop port abit. Then gasket match the intake manifolds, and use the remaining cash on a tune. Boom, 13 second car, easily.~97 3.8L V6 Camaro~
A few things
Only Member of Team Hooker?!?Comment
Comment