Tweet
yup, i just got slp manual fan switch in mail and i have a problem. How should i route the wire? first i was thinking of making a hole right above the steering column and then put some firewall grommet.. then i thought i don't wanna make a hole ....is there any other way? .....i should mention that it has a switch clip thats approx. 1cm x 1cm x 1 cm.... so i need atleast 1cm^3 clearance to route the wire with switch clip......let me know guys...
-
-
Re: slp manual fan switch...
go through the firewall grommet on the passenger side under the PCM. just more the PCM out of the way and your golden -
Re: slp manual fan switch...
does the switch give you more power or is it something to keep engine from overheatingComment
-
Re: slp manual fan switch...
take my advice, return it, i did this for $10 in about an hour, use Matt's writeup, you seriously wont believe how easy it really is, the blue and the green wires right next to eachother are the fan controls, all that has to be done is ground those wires, so you need a SPDT toggle switch, and about 10 feet of wire http://www.cardomain.com/ride/2197072/4 trust me, it is much more satisfying knowing that you did itLast edited by bah; 05-15-2006, 11:02 PM.Comment
-
Re: slp manual fan switch...
less then 10 dollars and less then an hour install.... heres mine... http://www.cardomain.com/ride/2245261/1<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.Comment
Comment