Tweet
Hello I have a 2000 camaro. About a month ago I got a remote start installed buy best buy they did a great job. And for about 2 weeks now my security turns on and starts to blink even if i try to remote start. I bought a new key didn't solve the problem and also some times it would fix it self by turning the blinking security light into a solid light and could start with key and remote. I took it to best buy yesterday they checked the remote start for about 3 hours and it wasn't the problem. They said they have never seen something like this . So I was thinking about just by passing the vats system by using the resistors that add up to my key. Is the wiring still set up where I can find the two wires that I can put the resistors into. Or is it messed up by the remote start? And another question instead of using resistors could I just take a old key that still works cut out the resistor without damage and solder two wires to the points and put the two wires were the resistors were goin to go?
-
Last edited by Mc.Nasty; 04-24-2013, 08:08 PM. -
Re: 2000 camaro security light Vats System problem Help
yes there are 2 white wires covered in an orange loom near the steering column. The remote start should not work if they didn't bypass the security. they may have used a module or something similar but it has to be bypassed. theoretically i guess you could take the resistor out of the key, but stereo shops will set you up with the proper resistors for like 2 bucks though.
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...5 days ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment