No 12's (yet) But New PB

[transamtom1]

Re: No 12's (yet) But New PB

Which LCA's? Hopefully you go with an SS3600. I LOVE my SS4000.

I just bought the cheap EBay ones from Founders Performance.

They look just as good as the more expensive ones.

Yes the Yank SS 3600 is on the menu.

[whitdog54]

Re: No 12's (yet) But New PB

What gears do you have now?

What psi were your tires at and which brand?

My 00 z28 A4 with only mods being a LM1 and lid went 13.2 @106 with 2.73 gears.

Now with some 555Rs, im gonna drop thme down to 18 or 20 psi, build up stock stall til 1300ish, then flash the stall right before green. Hoping for 1.9 60ft and a 12.8 with my crap 2.73 gears.

[transamtom1]

Re: No 12's (yet) But New PB

3.23's for the gears.

Hoosier DR's 255/50/16.

I started at 23psi and went down to 18psi for the last 3 runs.

I am changing over to a Magnaflow CB.

When I did the headers I left the CB that was on the car so I think there may be some power there.

I tried everything,off idle,flashing the converter until the wheels wanted to break loose.

Long burnout,short burnout,medium burnout.

Bone stock full weight she went 13.71 at 103.00 on a 2.0 60ft so there is lots of improvement going 13.141 at 107.83 on a 2.066 60ft.

Just not in the 60ft;)

[Bird_Of_Prey]

Re: No 12's (yet) But New PB

I wouldn't feel bad about that 60' at all. That's what most stockish LS1's do.

[transamtom1]

Re: No 12's (yet) But New PB

I wouldn't feel bad about that 60' at all. That's what most stockish LS1's do.

Thanks,I think the new converter will do the trick,everthing thing else is just a bandaid.

[whitdog54]

Re: No 12's (yet) But New PB

goodluck with new converter.

What was the DA?

[transamtom1]

Re: No 12's (yet) But New PB

goodluck with new converter.

What was the DA?

Not sure the track is 660ft above sea level.

[Bird_Of_Prey]

Re: No 12's (yet) But New PB

There is a calculator on dragtimes.com