15s with these mods?

[uno]

Ok with the mods I already have in my signature plus i am getting
Zexel LSD
3.42s
Acell 8mm
ASP underdrive pullies
1le Tranny Mount
Harwood LCAs
160 Powerstat
Do you think i'll be in the 15s with these mods
and if so, low or high 15s

[zccop2001]

my bet would be low to mid maybe.. like 15.3-.6

[NBMA4V6]

you wont be hittin low 15's with those mods in a 3.4.

you might see a 15.999999 but id put my money on low 16's

[southern94]

now way you will hit mid 15's maybe 15.9 if it is a good day probley like 16.3

[uno]

how?
i thought our cars ran low 16s stock?
Are you all adding the mods in my signature too?
goin from 3.08 gears to 3.42s won't drop my times at all?
i'm confused
second thing
what to do to get low 15s since i think i'm not headed in the right direction
[ April 18, 2002: Message edited by: uno ] :(

[ April 18, 2002: Message edited by: uno ]</p>

[southern94]

nope they probley run low 17's stock 3.4's are very restricted that is why we have a bigger aftermarket then 3.8's cause we have more to improve on look into getting some headers

[uno]

alright
thanx for the quick reply southern94
besides headers is there anything else i need to do?

[Tiago]

yea, 15.9999 lol, low 16s more like it...

[southern94]

posi cam headers shift kit stall converter

[uno]

i have an m5
and i have a new clutch
would you get the pcm reprogrammed too?

[MustangEater8251]

I think its very possible to get high 15s with the mods. he is right about the car bieng restrictive, my car has no top end but I think the 3.42s plus 5-speed are a nice combo to have. Watch that alt pulley, been known to cause charging problems. You might want ot do headers and I reccomend a bigger then stock I-pipe, I got one for free of a z28, (2.75in. over the stock 2.25 in on our cars), or you can buy one. I would power shift the hell out of the car, too, you have a clutch so you won't have many slippage issues. (like me occasionaly), if you do in the staigng lanes rev motor high and ride the clutch to heat it up a little before you race.

Do you have any tractoin problems? Also what were your times before?

[uno]

I am pretty sure i ran 16.41@81mph or something close to that.the mph may be wrong..it was last summer at bristol...
I beat a modded eclipse RS in that race
that's the only time i ran...and that was with my current mods minus the new clutch...
yeah now i have a little axle hop, plus my tranny mount is wore down i'm for sure...because it feels like it's hoping at low speeds not just off the line...so when i get all that fixed, i should be ok..

[MustangEater8251]

I think its possible, the LCAs should help with the wheel hop. Well we will find out.

alos may want a aluminum or jsut a stock steel driveshaft, (only $25 for the steel one)

[uno]

ok where can i get the driveshaft?
plus i was wondering can i get an oem replacement limited slip differential like from auto zone or something for a z-28....will that work?
we have the same rear ends right?
i'll only do that if it's alot cheaper than the slp one...but will it work?
thanx for answering all these questions i apreciate it a whole bunch :D

[southern94]

what kind of driveshaft you wanting check local salvage yards for em off a v8's ls1 have aluminum ds i think, or check v8 boards alot of people still have theres from when they upgraded i bought mine from a local v8 that upgraded his ds [img]graemlins/fluffy.gif[/img]