went tonight, wed. the 11th not very busy ran 13 runs, tried a few different things stalling flashing cutout open and closed... heres the best time slip...
reaction- 0.5693
60ft. --- 2.2836
330ft --- 6.2950
1/8th ET- 9.6049
1/8th MPH 74.66
1000 ET - 12.4760
1000 MPH- NONE
1/4 ET -- 14.9200
1/4 MPH - 92.36
the best 60ft. was around a 2.25xx, i figure that its mostly because of the cutout being open and losing some low end torque... with the cutout closed 60ft. dropped to 2.20xx but ET went up to 15.2xx so i kept it open most of the time... after the torque converter gets put in those 60ft. times will fall and fall fast, oh yeah and this is on the crappy eagle GA's hopefully getting new tires soon too... that will help... any feedback welcome and i'm gonna get it scanned in and submit it soon...
merlin
[img]graemlins/burnout.gif[/img]
Details for 12sec
mods, whisperer lid, cutout, lca's, free air mods,
gears, 3.42's/LSD
converter, stock
and the times that were flashed were about 2 tenths slower and 60ft.s were 2.3xxx stalled it up to 1500 and punched it... the rest of the stalled runs were very consistant between 14.9200 - 15.0700...
[ December 12, 2002: Message edited by: redbird00 ]</p>
reaction- 0.5693
60ft. --- 2.2836
330ft --- 6.2950
1/8th ET- 9.6049
1/8th MPH 74.66
1000 ET - 12.4760
1000 MPH- NONE
1/4 ET -- 14.9200
1/4 MPH - 92.36
the best 60ft. was around a 2.25xx, i figure that its mostly because of the cutout being open and losing some low end torque... with the cutout closed 60ft. dropped to 2.20xx but ET went up to 15.2xx so i kept it open most of the time... after the torque converter gets put in those 60ft. times will fall and fall fast, oh yeah and this is on the crappy eagle GA's hopefully getting new tires soon too... that will help... any feedback welcome and i'm gonna get it scanned in and submit it soon...
merlin
[img]graemlins/burnout.gif[/img]
Details for 12sec
mods, whisperer lid, cutout, lca's, free air mods,
gears, 3.42's/LSD
converter, stock
and the times that were flashed were about 2 tenths slower and 60ft.s were 2.3xxx stalled it up to 1500 and punched it... the rest of the stalled runs were very consistant between 14.9200 - 15.0700...
[ December 12, 2002: Message edited by: redbird00 ]</p>
Comment