I ran a 15.9 and my only mod was a K&N conical filter attached to the stock intake. My friend did ice down the plenum and throttle body and fuel lines when I ran that run. Orlando Speed World opens January 16th and we want to get my car down to 15.6 before we really mod my 3.8.
We plan to do the following:
1. Synthetic Rear Fluid
2. Synthetic Engine Oil
3. Remove Floor Mats
4. Remove Spare (done on the 15.9 Run)
5. Run under 5 gallons of 93 or higher
6. Over inflate the front to 40PSI
7. Inflate the rear to 22PSI
8. ICE plenum, Throttle Body and Fuel Line
Is there anything else we can do to get me to run his 15.6 in mostly stock form? I was thinking of mixing in some 100 octane in his 93 mix… We have added new plugs, we have removed his MAF screen and The car has only 40,000 miles(3.08 rear gears) on his 96 automatic… We really want to pull a 15.6 before headers or nitrous…
Gol10Dr
We plan to do the following:
1. Synthetic Rear Fluid
2. Synthetic Engine Oil
3. Remove Floor Mats
4. Remove Spare (done on the 15.9 Run)
5. Run under 5 gallons of 93 or higher
6. Over inflate the front to 40PSI
7. Inflate the rear to 22PSI
8. ICE plenum, Throttle Body and Fuel Line
Is there anything else we can do to get me to run his 15.6 in mostly stock form? I was thinking of mixing in some 100 octane in his 93 mix… We have added new plugs, we have removed his MAF screen and The car has only 40,000 miles(3.08 rear gears) on his 96 automatic… We really want to pull a 15.6 before headers or nitrous…
Gol10Dr
Comment