any idea what kinda of times i'd get?

[camaro_s10]

i have a '95 3.4L engine in my 1985 s-10 pickup. i took off the fuel injection and have 4barrel intake w/500 cfm carb, 4 speed manual transmission, not sure but i think it has 4.10 rear end, it's really low geared, but i was wondering if anyone had any idea what kinda of times i'd get. on the street i get around 80-85mph in the quarter.

[ January 18, 2003: Message edited by: camaro_s10 ]</p>

[WickEdSix9838]

high 16's-low 17's is my guess

[MustangEater8251]

not sure if its that bad, I might say low 16s, maybe faster?

best way to tell is run it.

If you are trapping 80-85 in the 1/4 and you do have 4.10s, not sure how the 4-speed plays into it, but you have the intake problem solved that most 3.4Ls use, and that is a decent sized carb for a 3.4L, that makes up alot, I am one of the faster 3.4L in a v6, and I trap 86sih in the 1.4 but I have 3.42s, 4.10s will kill your trap speeds.

If you ever do run it I am really curious what it ran.

Also ever weigh your truck? I had qa 4.3L carbed 92 GMC Jimmy, wasn't too heavy, but brakes and suspension were shot, had alot fo torque though [img]smile.gif[/img]

[ January 19, 2003: Message edited by: MustangEater8251 ]</p>

[xjarayax]

Try to get some sound clips of your car in action I'm sure a lot of the 3.4L guys would be interested.

Sam

[camaro_s10]

<blockquote>quote:</font><hr>Originally posted by xjarayax:
Try to get some sound clips of your car in action I'm sure a lot of the 3.4L guys would be interested.

Sam<hr></blockquote>

of mine? it's way loud,i can try

[camaro_s10]

<blockquote>quote:</font><hr>Originally posted by MustangEater8251:

Also ever weigh your truck? I had qa 4.3L carbed 92 GMC Jimmy, wasn't too heavy, but brakes and suspension were shot, had alot fo torque though [img]smile.gif[/img]

[ January 19, 2003: Message edited by: MustangEater8251 ]<hr></blockquote>

no, never weighed it. it's not very heavy i know that, and ya...it has a lot of torque, i can start in 2nd gear spinning the tires. [img]graemlins/burnout.gif[/img]

[MustangEater8251]

I think it should be pretty quick I was reading up on a fiero board how they had a stock 3.4L form a v6 f-body changed the intake to upper intake to something else and gained abotu 25 flywheel hp on a dyno.

[camaro_s10]

how do i do that sound clip thing? my friend has a video camera that he says you can put the video onto the computer, should i just do a little video?

[Loochy88]

youll need a way to get the video/audio to the computer. there are small devices that you can buy to put the clips into the comp. i bought somehting called dazzle photo and video maker. it works real well. you can record only audio if you want.

[camaro_s10]

so if i had a way to get the video clip to my computer, then using my friends video camera would work?