I have a race lined up tongiht with a 3.8L....
last week we raced I ran a 15.8 he ran a 16 flat, he had better R/T and won :(
We have a rematch tonight(assuming weather holds)
he has addes some stuff
(cutout, IAT module, removed fornt sway, removed rear seats) and I have done a few things as well, since around 3 o'clock on tuesday.... [img]graemlins/evilgrin.gif[/img]
I'll break it down...
him...
3.8 mods are:
Cutout
IAC Sensor Mod
K&N Conical
B&M Shift Plus
New Plugs
No rear seats. spare/floor mats
front tires 40PSi
rear tires 20PSi
ICE bags on plenum
no front sway bar
me
my mods as they were last wednesday
-lt1 rear end, 3.42s, lsd, 4 wheel disc brakes
-lt1 driveshaft(lighter then stock v6 2 piece driveshaft)
-poly torque arm bushing
-1Le trannymount
-TB bypass
-Accel 7mm plugs
-AC delco Rapidfires
-homemade CAI
-Cutout, with blocker plate
-CATCO high flo cat
-stock 96 z28 catback exhaust
-ASP crank underdrive pulley
-32/21 mm front sway bar
-Poly bushings and endlinks
counted up a little over 130 timeslips from this car.
We might put a little mroe then $1 down tonight.. we will see.
hopefully he will post in this thread [img]smile.gif[/img]
last week we raced I ran a 15.8 he ran a 16 flat, he had better R/T and won :(
We have a rematch tonight(assuming weather holds)
he has addes some stuff
(cutout, IAT module, removed fornt sway, removed rear seats) and I have done a few things as well, since around 3 o'clock on tuesday.... [img]graemlins/evilgrin.gif[/img]
I'll break it down...
him...
3.8 mods are:
Cutout
IAC Sensor Mod
K&N Conical
B&M Shift Plus
New Plugs
No rear seats. spare/floor mats
front tires 40PSi
rear tires 20PSi
ICE bags on plenum
no front sway bar
me
my mods as they were last wednesday
-lt1 rear end, 3.42s, lsd, 4 wheel disc brakes
-lt1 driveshaft(lighter then stock v6 2 piece driveshaft)
-poly torque arm bushing
-1Le trannymount
-TB bypass
-Accel 7mm plugs
-AC delco Rapidfires
-homemade CAI
-Cutout, with blocker plate
-CATCO high flo cat
-stock 96 z28 catback exhaust
-ASP crank underdrive pulley
-32/21 mm front sway bar
-Poly bushings and endlinks
counted up a little over 130 timeslips from this car.
We might put a little mroe then $1 down tonight.. we will see.
hopefully he will post in this thread [img]smile.gif[/img]
Comment