Anybody good with estimating times?

[95Batmobile]

With the mods in my sig, what do you guys thing I would run in the 1/4?

How about with the alunimum driveshaft, 3" high-flow cat and 3" exhaust, and 3.73 gears? What about 3.42 gears?

I am hoping to be mid 15s after I get the shaft, exhaust, and gears.

edit: Also, what if I took out the spare tire and seat and stereo and that junk?
Thanks! (By the way, don't mind the cosmetic mods. They don't matter here [img]tongue.gif[/img] )

[ May 20, 2003: Message edited by: 95Batmobile ]</p>

[naptown]

high 15's low 16's

[95Batmobile]

before or after future mods?

[OnixV6]

my guesstimate is high 16's before the mods and mid to low 16's after the mods. [img]graemlins/burnout.gif[/img]

[ravenp]

My guestimate is that you'll be in the 16's after those mod's :(

The wheels are going to hurt you and the 3" exhaust might be a bit much for that n/a 3.4?

Good luck though.. there's only one way to find out ;)

[MustangEater8251]

<blockquote>quote:</font><hr>Originally posted by ravenp:
My guestimate is that you'll be in the 16's after those mod's :(

The wheels are going to hurt you and the 3" exhaust might be a bit much for that n/a 3.4?

Good luck though.. there's only one way to find out ;) <hr></blockquote>

I think you will be in the 15s with the future mods, I am not sure about mid but its very feasible.

3 in. is not too much for the 3.4L, I ran a $15 muffler off my y-pipe to get my best times. That probable flows alot better then a full 3 in. catback.

THe 17s will kill ya, do you still have your stock rims around? Run those on the rears.