Cam only times?

[wicked]

Can some of you all list some of your cam only times. I mean with stock internal and heads.I am looking in to a cam and am wondering what to expect out of it.

[1998silverbird]

depends on what cam you get??

[wicked]

O.k. can you all list some of your times and then what cam it is that you have?

[foff667]

unfortunatly there are very few cam only guys out there right now so im not sure how many you'll find.

[Little G]

There's three N/A guys faster than me, and they all have head/cam.

[shenanigans]

I would assume cam only guys probaly run mid 14s at like 96ish... with average number of bolt ons.

[foff667]

Originally posted by shenanigans:
I would assume cam only guys probaly run mid 14s at like 96ish... with average number of bolt ons.

there are people shooting 250 shots only trapping 99...I wouldnt assume anything cam only since there really arent many out there.

[Pewter2K1]

I am cam only, no heads, no tuning, 3.42 gears and automatic. I ran it about 2 weeks after i put the cam in and ran a 14.60. 100 shot was 13.30. I have minimal weight reduction, wisper lid, and a magnaflow muffler with cut out. I know its faster now, just because of the people i have run on the street, either keeping up, or beating them. I would assume maybe I can see closer to a 14.2. I have a CompCams Blower cam. 210/220 .512/.512 115LS I really think a converter, or some gears would really help it out, because looking at they dyno sheet, the powerband doesnt really start rising til around 3000 RPMs, but it will carry the power past 6000. my pre-cam numbers were 171/212 after cam were 212/221. I need to get back to the track and to the dyno and see what it is like now after a year and a half installed.

[wicked]

Thanks alot

[wicked]

So with a tune and some more weight reduction you could run like a 14 flat. That is all i am hoping for is to run low 14s. So it is possibly.

[mike malloy]

back in the day i ran a 14.3 not even trying. i just rolled into the dragstrip and ran the 1/4. not bad being it was a 2 hr drive to get there.

i also have an a4 so i lose a bit more power

[WickEdSix9838]

Originally posted by Little G:
There's three N/A guys faster than me, and they all have head/cam.

Seppo is cam only.

[wicked]

Wickedsix9839 i have been looking into one of the cams from abbott racing. I think that is your father shop.I would like to be able to run low 14s. With just cam,tuning,suspension,DRs,and a good tune.

[WickEdSix9838]

Originally posted by wicked:
Wickedsix9839 i have been looking into one of the cams from abbott racing. I think that is your father shop.I would like to be able to run low 14s. With just cam,tuning,suspension,DRs,and a good tune.

Is your car an auto or a manual?

[wicked]

It is an auto.