6 Runs...
I am also a Convertible, so my base weight is heavier than a coupe. I have about @200 lbs of stereo/subs etc that is not really removable (molded/glassed in. I weigh about 160lbs. I removed the spare/jack and passenger seat..rear seats deleted due to music stuffs.
Automatic Tranny - 3.08 open diff. - Launches usually around 1500 rpm..
Was sunny, pretty warm and a bit humid...but most runs were consistant and didnt vary enough as it got warmer. Bitburg, Germany - old airbase flight line converted...(not street tire friendly) 18" Street tires. Also found later that day my right side front tire was LOW, like 22 lbs. :( Mods in Sig block
Run 1:
R/T: .530
60 ft: 2.397
594' ET: 9.625
1/8 ET: 10.274
1/8 MPH: 69.34
1000' ET: 13.362
1254' ET: 15.482
1/4 ET: 16.012
1/4 MPH: 84.91
14:15:37pm
Run 2:
R/T: .565
60 ft: 2.444
594' ET: 9.701
1/8 ET: 10.350
1/8 MPH: 69.34
1000' ET: 13.432
1254' ET: 15.552
1/4 ET: 16.076
1/4 MPH: 85.88
14:46:01pm
Run 3:
R/T: .793
60 ft: 2.258
594' ET: 9.549
1/8 ET: 10.202
1/8 MPH: 68.91
1000' ET: 13.300
1254' ET: 15.430
1/4 ET: 15.959
1/4 MPH: 85.07
15:52:25pm
Run 4:
R/T: .591
60 ft: 2.351
594' ET: 9.623
1/8 ET: 10.274
1/8 MPH: 69.12
1000' ET: 13.367
1254' ET: 15.498
1/4 ET: 16.035
1/4 MPH: 83.80
16:23:10pm
Run 5: I think here, or the next run I used my HPP+ III programmer and edited the 2-3 shift MPH back from +1 to +0 - seems I was bogging when hitting 3rd gear...thats where I was getting passed by people running 15.4 and 15.6 (around 1000 and 1254')
R/T: .650
60 ft: 2.327
594' ET: 9.571
1/8 ET: 10.220
1/8 MPH: 69.34
1000' ET: 13.302
1254' ET: 15.423
1/4 ET: 15.953
1/4 MPH: 84.91
17:01:45pm
Run 6:
R/T: .534
60 ft: 2.365
594' ET: 9.634
1/8 ET: 10.287
1/8 MPH: 68.91
1000' ET: 13.386
1254' ET: 15.515
1/4 ET: 16.046
1/4 MPH: 84.75
17:22:11pm
I know proper inflation of the front tires will help me roll through the 60'...I will be smarter next time. LCAs were installed as well.
Any help is appreciated! I am trying to devise a way to easly remove the stereo equip.
[ July 24, 2005, 01:53 PM: Message edited by: slick-metal ]
I am also a Convertible, so my base weight is heavier than a coupe. I have about @200 lbs of stereo/subs etc that is not really removable (molded/glassed in. I weigh about 160lbs. I removed the spare/jack and passenger seat..rear seats deleted due to music stuffs.
Automatic Tranny - 3.08 open diff. - Launches usually around 1500 rpm..
Was sunny, pretty warm and a bit humid...but most runs were consistant and didnt vary enough as it got warmer. Bitburg, Germany - old airbase flight line converted...(not street tire friendly) 18" Street tires. Also found later that day my right side front tire was LOW, like 22 lbs. :( Mods in Sig block
Run 1:
R/T: .530
60 ft: 2.397
594' ET: 9.625
1/8 ET: 10.274
1/8 MPH: 69.34
1000' ET: 13.362
1254' ET: 15.482
1/4 ET: 16.012
1/4 MPH: 84.91
14:15:37pm
Run 2:
R/T: .565
60 ft: 2.444
594' ET: 9.701
1/8 ET: 10.350
1/8 MPH: 69.34
1000' ET: 13.432
1254' ET: 15.552
1/4 ET: 16.076
1/4 MPH: 85.88
14:46:01pm
Run 3:
R/T: .793
60 ft: 2.258
594' ET: 9.549
1/8 ET: 10.202
1/8 MPH: 68.91
1000' ET: 13.300
1254' ET: 15.430
1/4 ET: 15.959
1/4 MPH: 85.07
15:52:25pm
Run 4:
R/T: .591
60 ft: 2.351
594' ET: 9.623
1/8 ET: 10.274
1/8 MPH: 69.12
1000' ET: 13.367
1254' ET: 15.498
1/4 ET: 16.035
1/4 MPH: 83.80
16:23:10pm
Run 5: I think here, or the next run I used my HPP+ III programmer and edited the 2-3 shift MPH back from +1 to +0 - seems I was bogging when hitting 3rd gear...thats where I was getting passed by people running 15.4 and 15.6 (around 1000 and 1254')
R/T: .650
60 ft: 2.327
594' ET: 9.571
1/8 ET: 10.220
1/8 MPH: 69.34
1000' ET: 13.302
1254' ET: 15.423
1/4 ET: 15.953
1/4 MPH: 84.91
17:01:45pm
Run 6:
R/T: .534
60 ft: 2.365
594' ET: 9.634
1/8 ET: 10.287
1/8 MPH: 68.91
1000' ET: 13.386
1254' ET: 15.515
1/4 ET: 16.046
1/4 MPH: 84.75
17:22:11pm
I know proper inflation of the front tires will help me roll through the 60'...I will be smarter next time. LCAs were installed as well.
Any help is appreciated! I am trying to devise a way to easly remove the stereo equip.
[ July 24, 2005, 01:53 PM: Message edited by: slick-metal ]
Comment