Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Updated from todays tuning, highest throttle was 90% highest boost was 9.5psi, arfs in check, spark knock is only there in a cell or 2 with less then 1* retard that i need to get rid of since i want absoluly NO knock!
Updated from todays tuning, highest throttle was 90% highest boost was 9.5psi, arfs in check, spark knock is only there in a cell or 2 with less then 1* retard that i need to get rid of since i want absoluly NO knock!
MAP tuneing, I cant do anymore till i get this boost sileniold that i ordered so that i can turn the boost to the levels i want through the ECU. The efficiencey range of that turbo is 7psi plus..So i need to be able to meter it better.
so do you have a 2 bar map? theres not a way for me to measure boost through my tuning software tuning the maf. can you post a link of the boost solenoid you are using. none of this stuff will probably ever pertain to me but i'm just curious....
so do you have a 2 bar map? theres not a way for me to measure boost through my tuning software tuning the maf. can you post a link of the boost solenoid you are using. none of this stuff will probably ever pertain to me but i'm just curious....
Im using a 3bar map. And the $59 code for the ECU tuning, as its settable for 2 or 3 bar map sensors.
Heres the link to the boost silenoid. Basically I can set values in the ecu that will control that silenild/which limits the psi that the wastegate sees, thus letting the turbo spool up more boost.
Heres the pigtail for the silenoild http://www.ebay.com/itm/120723539706...WNX:IT&vxp=mtr
One wire goes to a switched 12vts(anywhere on the fuse panel thats only on with the ignition) and the other goes to the ecu. On mine its the F2 pin, very easy to install im told..LOL
One side the vac comes from the turbo psi port(or the back of your manifold) then the other vac line goes into the wastegate.
Anyone ever run slicks.... i can get my hands on newer 26x10.5 ET slick on 15 inch rims for free basically. I havent made the trip to get them as im not sure if they fit. There off a friends car that was running 12.5's in the 1/4
I know thats alot more tire then i need but i CAN NOT afford to buy slicks and having that turbo and such is gonna eat my street tires up at the track
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment