Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
How did you launch it this time? Or did you wait for the weather to get better?
I just lanched as I usually do, but the other day I found a exhaust leak before the turbo, so it was spooling up very slow. Since I fixed the problem this car will light the tires up on dry pavement if you lay into it at 20mph+.
When I made that run above it was like 85 degrees out, 40% humididty, and a good 10mph head wind.
I made it into the 13's last night with 12psi till 70mph and 11psi after that. Best night Ive ever had with that car. I love running those 13's. Heres the proof. 13.70@99.36mph
I got the alky kit almost finished up and on the car. I just need to add a wire and a LED and were good to go. I hope this works out the way I want it. Mainly as long as my intake temps are low im happy. A safe engine is a happy one.
Yes there was. Mainly my intake temps are now basically within a few degrees of ambiant temps the who way down the track. I also lowered the boost a tad and ran close to the same times with 2psi less of boost.
The intake temps are now 60 degrees + lower then they were without the alky injection.
This is just a insurence policy to make sure I dont run into detination as that would ruin my day is a second with my cast pistons. In time when I set up the safety better I can tune for the alky for track time only. Hoping for a 12 second pass in the next month or 2. I have just been so busy so its hard to fit time in to tune the car and work on her.
Just ordered 48lbs injectors and will be ditching the 28lbs ones. Im really hoping that with the alky to keep me somewhat safe, more fueling, that I will be able to make a 15-16psi pull at the track sucessfully and mabey make a 12 sec pass??
If I get that on video that may be one of the fastest "engine code matching thirdgen V6" anywhere, as I've never seen a 12 sec 82-92 engine matching V6 f-body ever.
I wish. I afriend of mine modded then up. They look good I think, much better then the stockers and this will allow me to run all the exhaust above the K-member. So less piping=better spool up, and also no more chance of scraping the exhuast on bumpy roads.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment