Top end swap 2.8 - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Top end swap 2.8

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Top end swap 2.8

    Hey, guys!! I have an 81 Chevette that I just picked up a tbi 2.8, 700r4 and s10 rear end for and was thinking about a 3500 top end swap before I put it in the car. The original plan was just to drop it in and go, but I was unable to get the computer and wiring from the guy so it got me thinking top end swap and microsquirt. Is it worth it or should I just swap in a 3500? I know there is a lot of info on here and other forums, but it seems scattered and incomplete. Big thing I am wondering about is what crank trigger to use. What do you guys think?

  • #2
    Welcome to the forum!

    Some of the stuff on the earlier engines is definitely scattered a bit as there have been fewer guys to stop by and chime in with them. Megasquirt can do some great things, but does have its challenges from what I understand. I tried to look into using it way back when, but found a work around to my needs through using hp tuners as I was OBD II - you are not.

    I am very interested to see this build, so make sure you keep us up to date!

    If you are interested in running megasquirt I would give this thread a read: https://www.camarov6.com/forum/techn...ir-3-4?t=98934


    2002 SOM Z28 Camaro - 12.9 @ 104 mph
    1996 3800 Camaro - 13.43 @ 100.77 mph


    Project Cars | How To Guides | Scratch Repair | Synthetic Oil

    Comment


    • #3
      i'll defer to LETZRIDE, i just did the 3400 top end swap in the 85....... among other swaps
      1978 Formula 461 in progress of being built :rock:
      2013 Ram 1500 Big Horn

      former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
      94 comero 3.4

      Comment

      Latest Topics

      Collapse

      There are no results that meet this criteria.

      FORUM SPONSORS

      Collapse
      Working...
      X