3.1L swap to 3.4L or 3.8L - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

3.1L swap to 3.4L or 3.8L

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3.1L swap to 3.4L or 3.8L

    How tough would it be to switch from a 3.1L to a 3.4L or even a 3.8L? Would I have to switch out the gears and stuff? Tranny? Any help would be appreciated.
    1992 Arctic White Firebird<br />3.1L V6, TB Coolant Bypass, CAI, Turbo Muffler, other little things.<br /><br /> <a href=\"http://www.geocities.com/colinobu/MyHomepage.html\" target=\"_blank\">http://www.geocities.com/colinobu/MyHomepage.html</a> <br /><br />\". . .Finger in the air and the flag still wavin\'. . .\"

  • #2
    It would be really easy to swap a 3.4 in there. I am thinking of doing that in the future. You would be able to keep your transmission, computer, etc, so pretty much everything you have, you could use for the 3.4.

    The 3.8 would be a different story though, you'd have to get new everything because it is a completely different engine. The 3.4 is in the same family of engines as the 3.1. They are both 60° engines while the 3.8 is a 90° engine. So if you are looking for more power, or just wanting a fresh new engine, then I'd recommend going with the 3.4.
    <a href=\"http://home1.gte.net/res07t9s/index.html\" target=\"_blank\">My 1991 Firebird - 3.1L V6</a> with custom K&N CAI, Flowmaster, Sony CD, MTX 4-ch amp, 2 MTX 10\" subs, Sony & Polk speakers, Eagle Wheels<br /><br /><a href=\"http://home1.gte.net/res07t9s/index.html\" target=\"_blank\">My 1997 Firebird Trans Am</a> with T-Tops, Panasonic CD, Alpine Speakers, MagnaFlow Exhaust, and Lingenfelter CAI.

    Comment


    • #3
      Thanks. Yeah, my engine's got 158K on it, and i'd really like to keep it around for my kids, so i'd probably hafta' get a new engine eventually, so i figure i'll go for more power.
      1992 Arctic White Firebird<br />3.1L V6, TB Coolant Bypass, CAI, Turbo Muffler, other little things.<br /><br /> <a href=\"http://www.geocities.com/colinobu/MyHomepage.html\" target=\"_blank\">http://www.geocities.com/colinobu/MyHomepage.html</a> <br /><br />\". . .Finger in the air and the flag still wavin\'. . .\"

      Comment


      • #4
        ya, go look up KED85 on his 2.8-3.4 swap boogie. over at third gen. good stuff!
        1978 Formula 461 in progress of being built :rock:
        2013 Ram 1500 Big Horn

        former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
        94 comero 3.4

        Comment


        • #5
          yep I looked into this swap for my 85 Camaro, basically everything carries over. When you get down to the motor everything looks the same, the intake manifold, water pump. This is probable by far the easiest swap. I think GM sells a new motor for loike $1500, I found some places that would sell used 3.4L on line. I think www.tacreationsusa.com sold reliable 3.4Ls for like $350.

          Comment

          Latest Topics

          Collapse

          There are no results that meet this criteria.

          FORUM SPONSORS

          Collapse
          Working...
          X