Need to find the interior trim piece for pillar-mounted gauges... - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Need to find the interior trim piece for pillar-mounted gauges...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need to find the interior trim piece for pillar-mounted gauges...

    It is the piece that either replaces or sides over the moldings that cover the pillars that run on both sides of the windshield. The moldings are made to house 2" or 2 1/2" gauges. Obviously, I would only need the drivers side molding.
    I know some company(s) make them I just don't know where to start looking. Any and all help is appreciated.
    Thanks,
    Jim

  • #2
    Autometer makes the dual gauge pod. look in summitracing.com
    http://store.summitracing.com/partdetail.asp?part=2011

    Comment

    Latest Topics

    Collapse

    • Dongrossmd
      Throttle Position Sensor trouble shooting
      by Dongrossmd
      I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
      2 weeks ago
    • ssms5411
      New stereo
      by ssms5411
      Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
      2 weeks ago

    FORUM SPONSORS

    Collapse
    Working...
    X