Preformance parts for my 2.8??????

[Craft-Matic-Man]

Is there anywhere I can get preformance parts for my little 3gen? HP upgrades and such?

[wolf]

well, you're blessed with a 60* v6,so heres a parts list
http://www.s-series.org/htm/performance/60degree.php
:D

[ June 30, 2002: Message edited by: wolf ]</p>

[wolf]

oh, and if that fageol sc tickles your interest,heres alittle more info on it
http://614streets.com/Fageol.html

[Craft-Matic-Man]

[img]graemlins/thumbsup.gif[/img] SWEET!!!!!!!!!! [img]graemlins/thumbsup.gif[/img]

[wolf]

<blockquote>quote:</font><hr>Originally posted by Craft-Matic-Man:
[img]graemlins/thumbsup.gif[/img] SWEET!!!!!!!!!! [img]graemlins/thumbsup.gif[/img] <hr></blockquote>

whats your plans?
also is your 2.8 carb'd or tbi?
and you can add some cubes too you engine buy putting a 3.1 crank and pistons in it(2.8 and 3.1 have the same size pistons,but different pin locations,for there specified crank)

a good site for more info
http://www.60degreev6.com/index.html

[ July 02, 2002: Message edited by: wolf ]</p>

[Craft-Matic-Man]

It's EFI with some sort of throttle body, I'm going with the super charger. I think I'm going to need a new moter. I've go close to 300K on it now and I don't think she can take it. [img]graemlins/burnout.gif[/img]

[ July 03, 2002: Message edited by: Craft-Matic-Man ]</p>

[wolf]

tbi works good with the sc,just make srue you upgrade to the holly 470cfm tb,stock is around 250~300 cfm

any 60*v6 from a f-body will replace yours(stay away from 85 and under 2.8s,small cranck berings,garbage)

[3.4 slow to go]

tbi he means a tpi throttle body. those fageol superchargers are for carbed set ups. To use on the mpfi cars, ditch the intake, & use non-cc carb & vacuum advace distributor from s-10. don't forget to cut hole in hood [img]tongue.gif[/img]

[wolf]

<blockquote>quote:</font><hr>Originally posted by 2.8 slow to go:
tbi he means a tpi throttle body. <hr></blockquote>

O [img]graemlins/dunce.gif[/img] yea the sc wont work with mpi,it dose work with throttle-body injection tho

[Craft-Matic-Man]

So what you all are saying is I should snag some parts off of an old S-10 be for I go with the SC.

[wolf]

<blockquote>quote:</font><hr>Originally posted by Craft-Matic-Man:
So what you all are saying is I should snag some parts off of an old S-10 be for I go with the SC.<hr></blockquote>

damn skippy :D
But,I have heard the stock vara-jet carb isn't very good :(
http://discussions.gmforums.com/show...threadid=21102

[ July 03, 2002: Message edited by: wolf ]</p>

[Firebird Type R]

Also check www.fierostore.com
They have forged internals, stroker kits and other 2.8 goodies.