Minor set back, & some good news

[3.4 slow to go]

Set Back: when I "hung" the I-pipe on the bird, I broke a hard brake line on the axle. I'm now going to go ahaed & replace both wheel cylinders, the rear brake hose, & bend some new brake lines.

Good News: Headers should be shipped monday [img]graemlins/fluffy.gif[/img]

[Sean R]

good. I have some good stuff too

I took my door panel off and tightend up that loose rattling mirror. $free

Replaced my wobbeling handle ($10 used from pick and pull)

and greased up my window joints this weekend.

the previous weekend I replaced the door pin and bushings. ($4 auto zone)

There is not a single rattle on that door anymore.

[3.4 slow to go]

what was the p/n for the door pin & bushings? I have to do the drivers side. it hangs lowewr than a 89yr old hookers boobys :(

[Sean R]

whats p/n ?

[3.4 slow to go]

p/n = part number

[Sean R]

I dont know about the p/n I got a replacement at autozone this exact one, I bought two but only needed to fix one so here I scanned it for ya.

http://images.cardomain.com/installs...60_26_full.jpg

[ October 22, 2002: Message edited by: Sean R ]</p>

[3.4 slow to go]

thanks, 38407 x2

[Sean R]

you will need a spring compressor.
And another set of hands.

And im pretty sure there's no way around it, you gotta take the door completly off to remove the old bushings.

[ October 22, 2002: Message edited by: Sean R ]</p>