Top speed and RPM - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Top speed and RPM

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Top speed and RPM

    Peged the speedo (85mph speedo) today at 4k and got there pretty quick.

    In Denver I hit 85 at 5k and it took a while to get there (alltitude)

    Is it me or is that pretty good considering when My shift points are higher than that at WOT from a stop. If I am at 90 ish at 4k rpm and the revs are going up slow something tells me the car has a lot left in it, power is also still strong, not droping off.
    Black 96 Z/28, A4, T-tops, tint, 2.73 LSD, Kenwood.<br /><br />Previous Camaro: Bright white 86 Camaro, MPI 2.8 A4 3.42, tint, Z-28 wheels, a few goodies.

  • #2
    are the rpm's really that high @ 90 :eek:
    1978 Formula 461 in progress of being built :rock:
    2013 Ram 1500 Big Horn

    former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
    94 comero 3.4

    Comment


    • #3
      <blockquote>quote:</font><hr>Originally posted by 3.4 slow to go:
      are the rpm's really that high @ 90 :eek: <hr></blockquote>

      I thought that was low for 90? :( :(
      Black 96 Z/28, A4, T-tops, tint, 2.73 LSD, Kenwood.<br /><br />Previous Camaro: Bright white 86 Camaro, MPI 2.8 A4 3.42, tint, Z-28 wheels, a few goodies.

      Comment


      • #4
        When I had my 77 T/A, I think the rpm's were that high, but it had a 4sp. I've only gone about 4-5mph so far in my bird :( [img]graemlins/crybaby.gif[/img] so far
        1978 Formula 461 in progress of being built :rock:
        2013 Ram 1500 Big Horn

        former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
        94 comero 3.4

        Comment


        • #5
          Well this was at WOT, if I would have cruised at that speed I am sure it would have droped some.
          Black 96 Z/28, A4, T-tops, tint, 2.73 LSD, Kenwood.<br /><br />Previous Camaro: Bright white 86 Camaro, MPI 2.8 A4 3.42, tint, Z-28 wheels, a few goodies.

          Comment


          • #6
            In 87 they upped the speedo. My 87 2.8 A4 did 100 sometimes, but it was clearly running out of ability by that point.

            RPMs... I recall it was around 5K when I was up near 100.
            I solemnly swear I am up to no good.

            2008 Saturn Sky Red Line - Midnight Blue

            Pewter Mafia - 2000 Firebird - SOLD
            CENTRAL FLORIDA KNIGHTS!!!!!!!
            FLORIDA STATE SEMINOLES !!!!!!!

            Comment


            • #7
              What is your rpm at cruising speed for 90 mph (or 80mph)? On my car, I can go 80 at about 2,250 rpm on a flat highway. I'll have to see what the rpm is at 90. I have an automatic with 3.23 gears. I have gone up to 105, but I didn't check the rpms, and while the engine was obviously working hard to get there, it felt like it did have some power left.

              [ February 23, 2003: Message edited by: 91Firebird ]</p>
              <a href=\"http://home1.gte.net/res07t9s/index.html\" target=\"_blank\">My 1991 Firebird - 3.1L V6</a> with custom K&N CAI, Flowmaster, Sony CD, MTX 4-ch amp, 2 MTX 10\" subs, Sony & Polk speakers, Eagle Wheels<br /><br /><a href=\"http://home1.gte.net/res07t9s/index.html\" target=\"_blank\">My 1997 Firebird Trans Am</a> with T-Tops, Panasonic CD, Alpine Speakers, MagnaFlow Exhaust, and Lingenfelter CAI.

              Comment


              • #8
                3500 ish at cruise for 90mph. I know for a fact that 110 is probably my limit, I don't think I would want to go that fast on a tired engine and old suspension anywase but the speed limit around here is either 65 or 75 so its not that hard to get up another 20 or so mph
                Black 96 Z/28, A4, T-tops, tint, 2.73 LSD, Kenwood.<br /><br />Previous Camaro: Bright white 86 Camaro, MPI 2.8 A4 3.42, tint, Z-28 wheels, a few goodies.

                Comment

                Latest Topics

                Collapse

                There are no results that meet this criteria.

                FORUM SPONSORS

                Collapse
                Working...
                X