EGR removal - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

EGR removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • EGR removal

    I keep getting an EGR failure code during highway cruising so I'm about ready to just rip the whole thing out and wire a resistor in there to fool the computer. Has anyone done this recently and can help me with instructions, pictures, etc? Also is there a kit with the block off plates? tia
    David
    1995 Nissan Hardbody King cab XE, 5-speed, 4 banger<p>Looking for the right Camaro...

  • #2
    what type of egr valve is it? if it's the same (digital) as a 94 3.4, I'll sell ya mine $15.
    1978 Formula 461 in progress of being built :rock:
    2013 Ram 1500 Big Horn

    former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
    94 comero 3.4

    Comment


    • #3
      It's in a 1991 Firebird so I'm not sure. I think it is but I'll have to check. Good news, the bird had zero oil pressure after it warmed up and was smoking from oil leaking on the exhaust manifold. Bad oil pressure sending unit was leaking and causing the low reading.
      David
      1995 Nissan Hardbody King cab XE, 5-speed, 4 banger<p>Looking for the right Camaro...

      Comment


      • #4
        I'm suprosed it even started, but then, since I had my oil leak from the oil filter adapter, never mind.
        1978 Formula 461 in progress of being built :rock:
        2013 Ram 1500 Big Horn

        former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
        94 comero 3.4

        Comment

        Latest Topics

        Collapse

        FORUM SPONSORS

        Collapse
        Working...
        X