Does anyone know the ratings for injectors on the 2.8L?

[Jerriko]

In the engine tech database, it lists specs for the L32 and L36 but I need the info for the 2.8L. I will have to use the injectors from the 2.8L on the 3.4L so I will have to know what I need to raise the fuel pressure up to to achieve the desired flow. If the injectors are the same size, great! If not, I will have to take the specs from the 3.4L (17lbs x fuel pressure) and multiple them to get Y value. Then divide Y by the rating for the 2.8L injectors and that would be my desired fuel pressure.
Thanks,
Jim

[3.4 slow to go]

You don't have the 3.4 injectors? 2.8s are 17lbs also I belive. Just that the 3.4 injectors have a better pintle dispersion design. Besides, & I found this out researching the 3800 swap, the fuel pressures from the 2.8~3800 are almost identical, so I should be able to reyse my current fp for the new motor.

[Jerriko]

Well, geez! That seems WAY too convenient. But I guess I shouldn't complain since I know something won't go exactly to plan.
[img]tongue.gif[/img]

[Bud]

2.8 injectors are 13

http://www.thirdgen.org/techbb2/show...hreadid=190364
http://www.thirdgen.org/techbb2/show...hreadid=184815

[img]smile.gif[/img]

[3.4 slow to go]

hrmmmmmmm, wonder if it'll pass nazi e0check if I swap the 2.8 ones back in?

[Jerriko]

That makes more sense. It just didn't add up that if the 2.8 and 3.4 used the same size injectors even though the displacement was different.
Thanks. :D