34, heres a question for you about your swap... - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

34, heres a question for you about your swap...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 34, heres a question for you about your swap...

    Did you ever have the chance to compare the flexplate off of the 2.8 or 3.4 with that of the 3800? I am wondering because I am looking for an aftermarket flywheel for the manual setup with my 3.4L. I need to know if the bolt pattern on the 2.8/3.4 flexplate is the same as the 3800 flexplate. I have having problems finding a good flywheel for the 3.4 and am thinking since the diameter of the flexplates should be the same but I am not sure about the bolt patterns.
    Thanks,
    Jim

  • #2
    THe bolt pattern on the convertors looked 99% the same, even held them up to each other. Big question you need to find out is the tooth count on the flexplates.
    1978 Formula 461 in progress of being built :rock:
    2013 Ram 1500 Big Horn

    former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
    94 comero 3.4

    Comment


    • #3
      Actually, the bolt pattern I am looking for is the on the crank.

      Comment

      Latest Topics

      Collapse

      FORUM SPONSORS

      Collapse
      Working...
      X