Sound clips of my exhaust.

[Jerriko]

I just thought I would post something new on the 3rd gen board. These are some clips of my exhaust.
Idle
Revving
It smokes because its a little cold.

[Jerriko]

Hello?
Is there anyone out there?
Or is no one replying because of how is sounds shocking similiar to the likes of a Ricer... [img]graemlins/omg.gif[/img] :rolleyes:
The exhaust only has 1 1/2 psi of backpressure. Hopefully, the headers will change the sound of it a little.

[95Batmobile]

Haha I don't think aynbody is replying because you posted it in the 3rd gen board instead of intake/exhaust [img]tongue.gif[/img]
It does sound kind of high pitched :(
What exhaust do you have?
I have 3" and a Flowmaster and it sounds good.

[GreenDragon]

Sounds alittle ricy,But its good [img]smile.gif[/img]

[Jerriko]

It's a custom setup. True dual (2 1/2" pipes) exhaust with a H-pipe and Dynomaxes. I went with the dynomaxes cause I thought that the flowmasters were too loud. It was low pitched until I installed the Gold Racer rocker arms. Then it got loud again. I guess I should mention that when I am revving it, the tach is going to 6,000 rpm [img]graemlins/burnout.gif[/img]

[95Batmobile]

When I rev mine it goes to 6,000 rpm too [img]smile.gif[/img]

[Jerriko]

Originally posted by 95Batmobile:
When I rev mine it goes to 6,000 rpm too [img]smile.gif[/img]

Ah, but does it get to 6,000 as quick as mine?

[V6Firebird94]

mine can go past 6000 [img]tongue.gif[/img] i dont recommend it lol....it does sound pretty good tho for takin it all the way up to 6000 and not have it start doin that rickety v6 sound

[Jerriko]

Originally posted by V6Firebird94:
mine can go past 6000 [img]tongue.gif[/img] i dont recommend it lol....it does sound pretty good tho for takin it all the way up to 6000 and not have it start doin that rickety v6 sound

Well, seeing how I have spent some money in this engine, I was hoping that I could avoid the 'rickety v6 sound' but somehow ended up with the riceroni sound. :(

[95Batmobile]

Originally posted by Jerriko:
</font><blockquote>quote:</font><hr />Originally posted by 95Batmobile:
When I rev mine it goes to 6,000 rpm too [img]smile.gif[/img]

Ah, but does it get to 6,000 as quick as mine?
</font>[/QUOTE]That it does [img]smile.gif[/img]

[Jerriko]

Oh, what cam are you using?

[95Batmobile]

Stock cam...
believe it or not...
The computer programming + MSD DIS-4 made a HUGE difference. I see you are running an MSD as well, is that an MSD 6AL?

[95Batmobile]

Here you go... I am a total newb when it comes to getting video off my camera so it sounds like total ***, but it's the best I can do for now [img]tongue.gif[/img]
I will try to go make another sound clip tonight...
http://members.cox.net/joshualabelle/Revving.mp3

[Jerriko]

Originally posted by 95Batmobile:
Stock cam...
believe it or not...
The computer programming + MSD DIS-4 made a HUGE difference. I see you are running an MSD as well, is that an MSD 6AL?

It's a 6A. I went to distributor so I didn't need the DIS-4. Until I reprogram the computer, the rev limiter sits at 6,000 so it just bounces like mad. :rolleyes: I can't wait to do that but it has to wait for the LSD w/ 3.73s, T5 conversion and headers. I have all of these parts lying around and no time to do anything with them. :(

[95Batmobile]

haha its a good thing you are getting LSD with those 3.73s! I just got 3.73s with no LSD and it is kind of hard to launch the car :D
How much did you pay for your headers? AMM had the ceramic coated pacesetter's on sale for $270 right now, I wish I had money for them :( Damn college takes every last penny of mine heh.
I guess you can at least look at it this way, no time to install all these modifications. I need to fix my car before it gets modified anymore heh. It's getting a few problems right now :(