3rd gen Turbo Kit Group Purchase
http://thirdgen.org/techbb2/showthre...hreadid=277819
"Well guys, it's time.
I've finally heard back from all the suppliers, and everything's ready for the turbo group purchase.
Kit Includes:
1) ALL PIPING - Intake and Exhaust, from the manifolds to the catalytic convertor, and from the air filter to the throttle body.
2) All gaskets/couplings needed for that (including a full intake gasket set)
3) 30lbs/hr Accell hi impedence fuel injectors
4) a 21x12x3" super hi-flow intercooler (flows 1200cfm with only a 1.5psi drop)
5) 1 T3/T4 57 trim hybrid, .63 A/R turbine
6) 1 38mm wastegate @ 6psi
7) 1 recirculating BOV
8) 1 totally reprogrammed, drop in ECM chip
9) Full oil feed/return, -3an and -10an, respectively. Stainless braided lines!
10) Turbo bracketry, and intercooler bracketry
11) Gauge pod + Boost/vacuum gauge
The entire kit is ceramic coated, runs 6psi out of the box. The kit itself will support up to 14psi, with a reprogrammed chip - you will be able to go 9-10 on the chip included, though
AS OF RIGHT NOW, the kit is '86-89 MAF based 2.8s only. I'm still working on the '730 conversion - it will be a $230 option for the 2.8 guys, and that will allow the 90-92 3.1 SD guys run, too.
What can you expect? +100rwhp AND +140rwtq
Base price - $2950.
Payment methods - pretty much PayPal, or send a check/Money Order. Only problem, is PayPal's wonderful freakin' 2.9% charge!
Anyone paying through PayPal, the cost will be $3030.
Shipping will be $130, insured, for EVERYTHING.
So $3160 through PayPal (preferred) for 100rwhp and 140rwtq, with a spring change for even more power!
Just about everything you see on the list is able to be changed to whatever you want! Example, you want a T61, let me know - add $275, and you get a T61, with your kit built for that turbo.
If you've got a certain boost gauge you want, let me know, and just pay the difference, and so on.
Now the bad news - I have to have a MINIMUM OF 10 PURCHASES IN ORDER FOR THIS TO GO THROUGH. I've got a mandrel bender and CNC machinist ready to go, but the cutoff date is March 31st!
I'm officially starting this group purchase today, February 12th, and it will run until March 31st.
We have to have 10 purchases for this by then. This may be your ONE and ONLY chance to get a turbo kit - I don't think I'll be making any more after this is done (I can not BELIEVE the difference between doing 10 kits at once, and just doing a single kit!!) So get in NOW!
PayPal to Doward@cox.net ($3160)
MO/Check to -
John Doward ($3080)
PO Box 475
Anthony, FL
32617
Any questions? Concerns? Comments? If you need your order altered in any way, just PM me with what exactly you want, and I'll let you know the difference!
Feb 12th - Mar 31st
Minimum 10 purchases
Kits upgradeable, just PM me with what you want
Spread the word
I expect to have the 3.1 guys ready by the middle of March
__________________
~$~'88 Black 3.1/5 Speed Camaro~$~
222.4 rwhp / 291.2 rwtq - 255/334 @ flywheel
"
http://thirdgen.org/techbb2/showthre...hreadid=277819
"Well guys, it's time.
I've finally heard back from all the suppliers, and everything's ready for the turbo group purchase.
Kit Includes:
1) ALL PIPING - Intake and Exhaust, from the manifolds to the catalytic convertor, and from the air filter to the throttle body.
2) All gaskets/couplings needed for that (including a full intake gasket set)
3) 30lbs/hr Accell hi impedence fuel injectors
4) a 21x12x3" super hi-flow intercooler (flows 1200cfm with only a 1.5psi drop)
5) 1 T3/T4 57 trim hybrid, .63 A/R turbine
6) 1 38mm wastegate @ 6psi
7) 1 recirculating BOV
8) 1 totally reprogrammed, drop in ECM chip
9) Full oil feed/return, -3an and -10an, respectively. Stainless braided lines!
10) Turbo bracketry, and intercooler bracketry
11) Gauge pod + Boost/vacuum gauge
The entire kit is ceramic coated, runs 6psi out of the box. The kit itself will support up to 14psi, with a reprogrammed chip - you will be able to go 9-10 on the chip included, though
AS OF RIGHT NOW, the kit is '86-89 MAF based 2.8s only. I'm still working on the '730 conversion - it will be a $230 option for the 2.8 guys, and that will allow the 90-92 3.1 SD guys run, too.
What can you expect? +100rwhp AND +140rwtq
Base price - $2950.
Payment methods - pretty much PayPal, or send a check/Money Order. Only problem, is PayPal's wonderful freakin' 2.9% charge!
Anyone paying through PayPal, the cost will be $3030.
Shipping will be $130, insured, for EVERYTHING.
So $3160 through PayPal (preferred) for 100rwhp and 140rwtq, with a spring change for even more power!
Just about everything you see on the list is able to be changed to whatever you want! Example, you want a T61, let me know - add $275, and you get a T61, with your kit built for that turbo.
If you've got a certain boost gauge you want, let me know, and just pay the difference, and so on.
Now the bad news - I have to have a MINIMUM OF 10 PURCHASES IN ORDER FOR THIS TO GO THROUGH. I've got a mandrel bender and CNC machinist ready to go, but the cutoff date is March 31st!
I'm officially starting this group purchase today, February 12th, and it will run until March 31st.
We have to have 10 purchases for this by then. This may be your ONE and ONLY chance to get a turbo kit - I don't think I'll be making any more after this is done (I can not BELIEVE the difference between doing 10 kits at once, and just doing a single kit!!) So get in NOW!
PayPal to Doward@cox.net ($3160)
MO/Check to -
John Doward ($3080)
PO Box 475
Anthony, FL
32617
Any questions? Concerns? Comments? If you need your order altered in any way, just PM me with what exactly you want, and I'll let you know the difference!
Feb 12th - Mar 31st
Minimum 10 purchases
Kits upgradeable, just PM me with what you want
Spread the word
I expect to have the 3.1 guys ready by the middle of March
__________________
~$~'88 Black 3.1/5 Speed Camaro~$~
222.4 rwhp / 291.2 rwtq - 255/334 @ flywheel
"
Comment