Zzp gt2

[Choppers]

So with this cam it says pushrods are not needed but recommended. What do you guys think? How many didn't put new ones in and how many did?

[ssms5411]

Re: Zzp gt2

Since it has alot of lift I would at least get some Comp 5/16th pushrods or the ones I like Comp .105 puhrods very nice quality. Also get 105 springs and modded retainers and Viton guides , well worth it in the long run. BTW I have new 105 springs never used for $110 shipped.

[Choppers]

Re: Zzp gt2

why didn't you use them? also when you say guides(what do you mean i don't see any on zzp's website).

I may get those spring from you.

[ssms5411]

Re: Zzp gt2

Went with 130LB springs for my double roller. I have 2 sets of 105's and 2 sets of 130lb springs 2 new 130lb springs which I'm using for my car and sparee motor and selling the new 105LB springs and when I get the used 105's out will sell them (have about 10,000 miles on them). I have 2 sets of Comp .105 pushrods and will sell my 5/16 pushrods when I get them out. Also 2 sets of JP double roller timing sets , one for my car and one for the spare engine L26. And the list goes on.

[Choppers]

Re: Zzp gt2

would you be willing to take $100 shipped for those springs?

[Choppers]

Re: Zzp gt2

also what about those guides? Are you talking about valve guides?

[ssms5411]

Re: Zzp gt2

$110 shipped is a really good deal on new springs that would be $140-150 shipped from ZZP so that is firm There even in the original box from Comp . Viton guide seals for the guides, which with modded retainers and Viton guide seals will give you and extra .050 clearance for whatever you setup will be, mine is going to be close running 1.7 Comp promags with my VS cam, its like .544/.538 something like that.

[Choppers]

Re: Zzp gt2

yea right now all I have is $100 thats why I offered you that. Yea i got ya on the valve seals. I thought you meant valve guides.lol

[ssms5411]

Re: Zzp gt2

Let mr know when you get $110 and their yours paypal is 17607@msn.com I will be posting alot of mods in the for sell section here soon.

[Choppers]

Re: Zzp gt2

yea if you will hold them for me that would be great...do you have any modded retainers or anything else i might need for the cam install?

[ssms5411]

Re: Zzp gt2

No, not for sell I have 2 sets , one for the cars engine and 1 set for the spare. Their not too expensive though like $55. Its will take some money if your looking to do it right. Whih is the only way to go. I have learned the hard way at times.

[Choppers]

Re: Zzp gt2

another q...so i would need the 7.05 5/16 push rods by comp cam right?

[ssms5411]

Re: Zzp gt2

yea if you will hold them for me that would be great...do you have any modded retainers or anything else i might need for the cam install?

It will be after I finish my turbo build and P/P heads/ Intakes, double roller , 65lb injectors etc. I will then post everything I have left over, butif you get the money remind me so I can sell you the new ones and not the used ones. Just PM me.

[ssms5411]

Re: Zzp gt2

another q...so i would need the 7.05 5/16 push rods by comp cam right?

Yes , most people are running the 7.05 pushrods, I will have a used set of CoMP 5/16 pushrods with 10,000 miles on them if you want to wait 2 weeks.

[Choppers]

Re: Zzp gt2

yea i don't like buying anything used so if you would just hold the new ones. Will probably after chritstmas untill I can really afford them. Is that fine?