Help needed for pulling heads

[Inverted]

So I've managed to get the UIM/LIM off of my 98 3800. I've removed the valve covers and the 4 bolts from there. However, I can't seem to figure out where the other bolts are that I need to remove. Are they the bolts under the exhaust manifold? I removed the shroud covering the exhaust manifold on the passenger's side, but there isn't enough clearance to remove it fully.

[espey_16]

Re: Help needed for pulling heads

Yeah there's a few under each manifold, and I think 1 or 2 on the front of the passenger side head.

[techsan23]

Re: Help needed for pulling heads

So I've managed to get the UIM/LIM off of my 98 3800. I've removed the valve covers and the 4 bolts from there. However, I can't seem to figure out where the other bolts are that I need to remove. Are they the bolts under the exhaust manifold? I removed the shroud covering the exhaust manifold on the passenger's side, but there isn't enough clearance to remove it fully.

There are 4 more next to each of the spark plugs.