intake gasket change LOOKKKKK!!!!! - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

intake gasket change LOOKKKKK!!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: intake gasket change LOOKKKKK!!!!!

    Rebuttal is slang?

    Comment


    • #17
      Re: intake gasket change LOOKKKKK!!!!!

      Nope - a valid word last time I checked.
      96 White M5 Camaro. Manual everything. Magnaflow cat, dynomax dual outlet axle back. Swapped to a disc rear with 3.42s and a torsen differential, kyb gr2 rear shocks, moog rear endlinks.

      Comment


      • #18
        Re: intake gasket change LOOKKKKK!!!!!

        Originally posted by 3.8lcoty View Post
        okay what are you saying you use to much slang
        You're kidding right??

        Your grammar and lack of punctuation makes my head hurt reading your posts. YOU'RE the one I'm talking about when I say I can't understand what you're saying. It would be a lot easier to decipher your scribble if you could run a spellcheck before you post....
        1995 Pontiac Firebird
        2008 Chevrolet Silverado LT Crew Cab 4x4

        Comment


        • #19
          Re: intake gasket change LOOKKKKK!!!!!

          And there it is... well worth the wait :roll:

          Comment


          • #20
            Re: intake gasket change LOOKKKKK!!!!!

            Originally posted by Docta View Post
            And there it is... well worth the wait :roll:

            lol, moving on to the intake issues.....:burn:
            Wait, Is that a V6 or V8?
            1990 Chevrolet C-K 1500 series 4.3L .. 5spd
            1994 JDM Euno Roadster 1.8L 5spd Bolt Ons.. etc
            2000 Camaro 3.8L Auto Bolt Ons..etc

            Comment


            • #21
              Re: intake gasket change LOOKKKKK!!!!!

              Originally posted by ACiFiC View Post
              lol, moving on to the intake issues.....:burn:
              X2 back to the intake issues , were they fixed yet?
              08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
              96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

              Comment


              • #22
                Re: intake gasket change LOOKKKKK!!!!!




                this was my intake as a result of a cracked head

                Comment


                • #23
                  Re: intake gasket change LOOKKKKK!!!!!

                  That sucks , did it overheat?
                  08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                  96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                  Comment


                  • #24
                    Re: intake gasket change LOOKKKKK!!!!!

                    wtf i did the change got it done and all and i srated her and it leaked in the same place as before(front bolt on lower intake on driver side) and then it stoped and sryed up and it has been keeping cool but then i when threw the drive in and she got up to about 200 then i lookled under the hood and she leaked a little agin what should i do i am stumped this sucks should i rvt around it
                    Last edited by ssms5411; 07-31-2011, 06:27 PM.

                    Comment


                    • #25
                      Re: intake gasket change LOOKKKKK!!!!!

                      sorry guys i was trying to type fast srated is started,sryed is dryed,when is sapose to be whent

                      Comment


                      • #26
                        Re: intake gasket change LOOKKKKK!!!!!

                        Sounds like it needs redone , putting RTV around it won't do much for a leak.
                        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                        Comment


                        • #27
                          Re: intake gasket change LOOKKKKK!!!!!

                          what you mean take it all back apart

                          Comment


                          • #28
                            Re: intake gasket change LOOKKKKK!!!!!

                            Did you rtv where the ends of the rubber gaskets meet with the gaskets go on the heads?
                            1997 Chevrolet Camaro
                            L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb.

                            Comment


                            • #29
                              Re: intake gasket change LOOKKKKK!!!!!

                              Originally posted by 3.8lcoty View Post
                              what you mean take it all back apart
                              If its leaking you will have to do it again.
                              08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                              96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                              Comment


                              • #30
                                Re: intake gasket change LOOKKKKK!!!!!

                                well i mean i did everything right lined up the gaskets and put the rtv on the 4 points and pushed it down in the cracks so i made a good seal so i dont know what the problem is

                                Comment

                                Latest Topics

                                Collapse

                                FORUM SPONSORS

                                Collapse
                                Working...
                                X