I have a 97 Camaro with a bad engine and have bought a 2000 Firebird (rolled) with a good engine. I see that the sensors on the air intake are different and the intakes are also different. What do I need to do to use this later engine in the Camaro? Do I just change the intakes? This is my first Camaro by the way. Both cars have an AT. Thanks, old British car guy in NC.
Announcement
Collapse
No announcement yet.
2000 Firebird to 97 Camaro 3.8 engine swap
Collapse
X
-
-
Re: 2000 Firebird to 97 Camaro 3.8 engine swap
Originally posted by Tom Rs View Posti would just swap over the intakes and harness08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: 2000 Firebird to 97 Camaro 3.8 engine swap
its pretty simple. once you get both engines out then you can see whats different. I think its just intake and exhaust, but don't quote me on that. I swapped in a series 3 out of a 08 lucern, that was a pain in the butt!Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...3 weeks ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.4 weeks ago
Comment