Tweet
2000 Firebird to 97 Camaro 3.8 engine swap
I have a 97 Camaro with a bad engine and have bought a 2000 Firebird (rolled) with a good engine. I see that the sensors on the air intake are different and the intakes are also different. What do I need to do to use this later engine in the Camaro? Do I just change the intakes? This is my first Camaro by the way. Both cars have an AT. Thanks, old British car guy in NC.
-
-
Re: 2000 Firebird to 97 Camaro 3.8 engine swap
i would just swap over the intakes and harness1997 Camaro LS1 RS
1994 Camaro - Sold
1999 Trans am Vert - Sold
A Few Mods.... -
Re: 2000 Firebird to 97 Camaro 3.8 engine swap
X2 There are some previous threads about swapping in a newer engine.Originally posted by Tom Rs View Post08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: 2000 Firebird to 97 Camaro 3.8 engine swap
its pretty simple. once you get both engines out then you can see whats different. I think its just intake and exhaust, but don't quote me on that. I swapped in a series 3 out of a 08 lucern, that was a pain in the butt!Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago
Comment